Jump to content
SAU Community

Recommended Posts

Um, without knowing a little more about the car, its kinda hard for us to give you a balanced opinion, but $16K for a RSFour S is a pretty sweet price (if the car is in good nick) With the state of the yen ATM I doubt very much that you could even import one for that.

More pics maybe?

I beleive you are getting this from Ben (Brighton Bikes and Bits) up in Brighton? I brought my S2 Prime Edition from him and he's very good

did you ask if they are legit k/m's (that's the only concern I have) but having dealed with him, he would told you straight up

16k for a RS-Four S?? that is damn great value and with reg as well that's a bonus

One last question...did you take the photo's yourself or are they from the ad (just that the engine bay pic doesn't have any compliance tags) (it's most likely passed compliance by now)

Edited by BigDirtyJase
I beleive you are getting this from Ben (Brighton Bikes and Bits) up in Brighton? I brought my S2 Prime Edition from him and he's very good

did you ask if they are legit k/m's (that's the only concern I have) but having dealed with him, he would told you straight up

16k for a RS-Four S?? that is damn great value and with reg as well that's a bonus

One last question...did you take the photo's yourself or are they from the ad (just that the engine bay pic doesn't have any compliance tags) (it's most likely passed compliance by now)

Yeah I am, he's actually a very good friend. No didn't take the pics, they're off the advert... I drove it last night and it seemed damn nice.

I think i'm going to jump in!

I paid that for my auto without rego so thats fantastic price for a manual, as mentioned previously with the Yen price as it is a total bargain. I wish I could sell my auto and buy a manual so much!!!!!

BUY IT!!!

all my compliance stuff is in the door, i heard they do that now something to do with front cuts etc....anyways i think its a really good price if its all in good nik. I paid about 16k to import my own rs-four-s a few months ago, but that price isnt including rego so yeh seems like a good price. my car has the touch screen unit though and a hks exhaust, but a few more k's than this one....glad i imported mine when i did cos if i did it now it would cost me about 21k....huge difference

open the oil cap (on the rocker cover) and look inside and see if it all looks clean and shiney and the oil is mint and give it a clutch kick in third under hard load to make sure the clutch isnt on the way out . they like a grand for the clutch and quite a bit of labour to replace .

I just find really hard to deal that I have 18k for my car and now they are down to 15....I guess that what happens when you brought it in Januray this year.

I paid 18.5k for mine (with the BBS RG-R Rims) but I can't complain...that was the going rate for a S2 and it was a Prime Edition (electric & leather seats, seat warmers, "woodgrain" interior). manuals back then were still 22-25k

oh..well..can't cry now...still happy

i got my RS4s through ben a year ago... cant complain about a thing with him but cant say the same for the compliance joint he uses... i told them to have some minor rust repaired properly, paid them $500 to do it and when i got the car it looked like they'd just painted over it... sure enough, a month or so later, guess what started to show through the new paint. it's now bubbled through again.

but oh well..... $16 000 is about what i paid for mine in the end, 81 000k, twin sunnies... just needed coil packs and the rust done.

my advice - check all usual rust spots before and after comliance(if not already done)

D.

i got my RS4s through ben a year ago... cant complain about a thing with him but cant say the same for the compliance joint he uses... i told them to have some minor rust repaired properly, paid them $500 to do it and when i got the car it looked like they'd just painted over it... sure enough, a month or so later, guess what started to show through the new paint. it's now bubbled through again.

but oh well..... $16 000 is about what i paid for mine in the end, 81 000k, twin sunnies... just needed coil packs and the rust done.

my advice - check all usual rust spots before and after comliance(if not already done)

D.

near the mirrors? in august? think i looked at it

The stock clutch will hang on as long as you dont launch the car and abuse it. My held with 265 rwkw and I only replaced it because I knew I would have to soon enough anyway.

I had a cushion button installed and it was approx 1200 plus install which is usually 400, a heavy duty was approx 1000 plus install.

I am VERY happy with the clutch I bough I can dial the revs right up and dump the clutch and she hangs on very well!!!

The price is quite good, I paid over 20 on the road 12 months ago but I didnt mind paying a bit more because it is immaculate and has been a perfect car ever since.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...