Jump to content
SAU Community

Group Buy: R33 Gtst And R34 Gtt Cold Air Box Cover


Recommended Posts

Nissan Skyline R33 GTS-T and R34 GT-T Brand New Cold Air Box Cover which is designed to house Pod Filters.

This assists to reduce power loss caused by the sucking in of hot air from the turbo.

The box is made of ABS plastic, and features allen key bolts and nut inserts.

$50.00 each

Some adjustments may be required when fitting, depending on your intercooler and setup.

Pictures are example pictures of a R33 Series 1 1993 Skyline with the Cold Air Box Cover fitted and R34 GT-T. All piping are the same the only difference between the two models is the catch can behind the headlights are different so around that area its not a flush fit in a 34 but is not noticeable. (as shown in pic)

The example skyline R33 is set up with a Hybrid front mount intercooler and APEXI pod filter.

The cover will definitely fit the GTS-T without many adjustments as it did for me,

but I am not sure how well it suits with other models. (adjustments may be required)

The example R34 is also set up with a Hybrid Front mount cooler with a Drift pod filter.

As tested the cover will fit a 34 GT-T but you may require some adjustments depending on cooler size

You are welcome to view the item and pick up in south-east Melbourne, or postage at buyers expense.

You may pm me or post here if you require further detail.

How this will work is we will need at least a minimum of 15 confirmed numbers to get these made, and either a deposit or full payment of the item may be required as I do not have the funds to get a huge number of these made up at once but this will be confirmed within the next day or so.

PICS WILL BE POSTED TONIGHT

  • Replies 211
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

thats great guys keem them interest coming

pics will be posted tonight. works being gay and wont let me go onto photo bucket.

sorry about the delay guys but here are the pics

these are for R33

post-a187181-air-box.jpg

post-a187182-air-box-2.jpg

P021108_131901.jpg

and here are the R34 pics. now the side panel are the same the only thing of concern was the top cover but as you can see it all fits very well

P021108_1317.jpg

P021108_1319.jpg

and this is the pic of the side panel. first hole if for air intake pipe and second hole if for cooler pipe feeding into the cooler

P021108_1318.jpg

arrgghhh how about a R33 GTR! in fo shiz if you can swing it to get made too,

sorry mate but GTR at this stage is a no go as we only have template for us poor folks with GTST's and GTT's lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...