Jump to content
SAU Community

Group Buy: R33 Gtst And R34 Gtt Cold Air Box Cover


Recommended Posts

  • Replies 211
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

would also like to know due to christmas funds increasing :P

R33 GTST S1 with stock cooler piping holes

Edited by auss13

have recvd 4 payments so far. details of transaction hasnt been updated yet so but have recvd pms from those who has made the payments. ill be sending some out tomorrow once my accounts updated showing whose payments has come in.

also these will be coming in as a registered post.

ta

Ash

also another quick note

for R34 ppl i apologize but i over looked the AC condenser so a small alteration will need to be made to install the box. i did mine last night and its not hard at all and that side cannot be seen. all that needs to be done is a small section prop 5cmX5cm to be cut out. other then that it fits nicely. ill post up a pic of the install and how much an where needs to be cut.

for R33 ppl these are a straight bolt on.

sorry guys but i dont know how i over looked this.

here is a pic of my install.

it was a very quick 15min job and sorry about the pic.

iv also attached a pic of the piece i had to cut out.

again i apologize for looking over this but as you can see its a very small thing.

installed in my R34 GTT

24122008057.jpg

24122008058.jpg

24122008059.jpg

you can see here the bit i had to cut to make way for the AC condenser

24122008060.jpg

the size of the plastic cut out

24122008061.jpg

and here is a side pic of the box. the red square is what needs to be cut out

P021108_1318-1.jpg

Too easy mate :santa: Say when you want to check your radiator overflow bottle is it hard?

nope

the top lid is held in by 3 allen bolts. just undo that the top cober comes off and presto you AFM, pod and radaitor bottle is there

also howie and MR XTC i got your payments today tomorrow im sending them off YAY

lol

Yay me and howie are first neh neh :)

lols!

hopefully i can get it before NYE or else party organisation is gonna' take up most my time.

No more defects booyeah!

Greatest investment to date :devil:

MRXTCZ

lol

money is in just the transaction details hasnt been updated to tell where the cash came from.

eMsta might have an extra box left over so ill let ya know soon along with others that have sent me pms.

any chance for me getting one i can send payment or pick it up any time really would love one of these

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...