Jump to content
SAU Community

Group Buy: R33 Gtst And R34 Gtt Cold Air Box Cover


Recommended Posts

  • Replies 211
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

still waiting on mine also

wont stress to much till friday or so, im probably a bit further away then most people lol

haha try being in Perth..:down:

yeah I'm giving it till Friday or so too, should be good no rush anyways..

Edited by viet_boi

dang sorry guys didnt know it would take this log.

but if any one is NSW wants a box that has holes cut out already for a FMIC dori32 has a box which i sent up in error. no wait just pay him the cash and pick it up.

dori32 i ave a new box on its way for ya tomorow

Yep pretty straight forward.. although the top pipe (factory cooler piping setup) was a little hard to get right, i ended up doing a right royal mash of a job on that one lol.

+1, had to make that bigger, and afm would fit through the hole either, had to file that out. doesn't sit perfect, but im going to make it work. Cheers Ash

Just got mine now

looks pretty good :(

is someone doing instructions for these?they dont look to hard but always helps to know wat your doing

the only problem i can see with mine is that my afm seems to be mounted a bit to far towards the engine so that may have to be moved or the box adapted but other then that looks fine :)

wanna say a big thanks to Ash for setting up this group buy.

received mine early this morning, and am really happy with the product. will be fitting it in soon and will hopefully load some pictures.

Big thanks agian Ash.

Got mine today aswell.. came in the morning..

Got home from work .. lovin' life ..

trying to put it on now ..

Seems like im in the same boat as you Callan, my AFM / Pod sit way too close to the Engine.. So seems like a lil bit of chrome piping is goin' to be needed -.-

Also, on that note im going to me drilling a hole for some piping just underneath the Pod, and attatch a funnel to my bottom right of my front bar :(

Cold air intake :)

Will upload pics when im done .. probably on the weekend.

MRXTCZ

lol i think mine is just where it was mounted. I dunno will have a look but might just have to adapt the cold air box to fit cause i dunno how much more room there is in front of the pod... I need a new one anyway :P

who will be the first to put up a Tutorial with pics and what not.... that is the real question. I think ill be busy for at least a week plus i will have to fiddle with mine a bit lol

I still need to make a whole for the piping to the funnel in the front bar.. holes under neath where the pods placed..

Also need to cut holes into the box, because i got myself a blank one.

Also need to cut the box to accomodate the A/C piping and radiator overflow bottle lines.

MRXTCZ

hey good news your guys got it. dori i sent yours this arvo mate (well work did lol)

as for instruction i didnt really install one where i had to cut the holes so either wait till i do an install here in melbourne or if our good mate howie can just do a run down of how he did his with the cutting.

i have a z32 afm and didnt need to trim the afm hole so looks like theres a little difference there.

well next group buy will be with all kinks sorted out.

thanks again to all that had the patience to wait (i do get a bit lazy lol) now enjoy keeping them pods nice and cool.

received mine today ash..

looks good, fitment was tight but that's what is ideal.. bit of fiddling to make it perfect but i couldnt ask for much better

cheers

Edited by .:: GimpS-R34 ::.
vicky will call aust post and track down cause howie hasnt received his yet either so im guess delay cause of holidays or what not

but for the following ppl i hve gotten your payments and im sending the box for today

BOOSTIN96

URTWHISTLE

AZSTRYDER

R34GTFOUR

DAMOR34

VIET BOI

DORI32

GIMPS34

sheng

who pud SALISBURY down as a referance??? dont know who this is so will have to filter through my pms *sigh* please put your user name down as reference when you transfer money. who ever made the transfer can you pl;ease send me a PM with your details.

so ye again for those who are still to make payment please put your sau user name down as a reference then pm me with address.

ta

Ash

It was I that put down Salisbury as a reference.

sorry mate i did get your pm and i over looked it with so many messages just flooding through. if you still want ill send you one tomorrow morning or more then happy to refund

my apologies

now enjoy keeping them pods nice and cool.

Im planning on getting some insulation foam from clark rubber, and sticking that to the inside of the box, should be like winter for my pod then.

hey guys

can any of these ppl who has not gotten their box yet please send me a pm so ic an give you your tracking number. so far its only Sheng that has pmd me about not getting his box so i can chase this up for you.

BOOSTIN96

URTWHISTLE

AZSTRYDER

R34GTFOUR

DAMOR34

VIET BOI

DORI32

GIMPS34

sheng

also if your satisfied with the box if you can a trader rating will be great :cool:

ta

Ash

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...