Jump to content
SAU Community

Advice For Private Selling.

KezR33

By KezR33,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

KezR33 Veteran

KezR33

Posted
Posted

I never sold a car privately before and was wondering if anyone has any general advice on what and what not to do. Just little tips you know, like who let test drive the car or mistakes people have made in the past.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/243371-advice-for-private-selling/
Share on other sites
JAS-25T Grand Master

JAS-25T

Posted
Posted

Here is a good list of tips from a thread where a guy had his car stolen while selling.

mate, sorry to hear your car got stolen. but it's common sense to always get a photo copy of or just hold onto the guys licence before you go anywhere. do not get out of the car at any time when the keys are in the ignition. so if you are going to let him drive, hop out taking the keys with you, then hop back in the passenger side and give him the keys. don't get out again to swap back until you have the keys again. always have another friend with you when you meet the guy. and just use some character judgement. I know you weren't expecting it but there were plenty of set-up clues. meet up where he didn't have a car, private number, bumbag and gold chain, no licence shown... this guy is screaming "i'm going to steal your car".

I'd also have a friend or two with you in the car at all times.

babyskyline Grand Master

babyskyline

Posted
Posted

as above. Make sure you have some mates with you so that it will make it harder for the "buyer" to try anything.

There are so many dodgey pieces of sh*t out there that are willing to take your hard earned no questions asked

nismo_god1 Apprentice

nismo_god1

Posted
Posted

yes at least one person with you....get hold of their license...get them to come to you....dont put up a price that you will sell at not a price higher so that you can bring it down to the selling price...

from my experience...sold about 8 cars.....5 in the last 18 months, the quickest pain free way to sell is put the price you think it should/will sell for and let everyone know that its final price....you might scare off a few lowballers and get less hits, but from experience its easier to sell this way...

or through a reasonable price up.....and then when ppl call and ask your lowest price, oh and they will ask, tell them the price you want to sell for and that its final.

be realistic.....if you want quick sale means you need to drop price....dont do what i do and buy your next car before you sell old one....puts more pressure on the sale and means you will have to sell it cheaper....

GUN_METAL_GTR32 Grand Master

GUN_METAL_GTR32

Posted
Posted

its hard to sell car atm moment, with the market and all. i sold my gtr last year and my s14 just after that and it took f**king ages.

def take his/her licence and dont let noone drive it till u see the cash

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted

Set the rules when you see your car.

No time wasters!

Serious buyers only!

You can take them out for a test drive but don't let them drive it until they put a deposit down.

Use the spare key and like others have said, have a friend around to watch your back.

Preferbly let ppl come see the car during the day so they can see everything clealy and not make up excuses.

When ppl say "I'll give you a call tomorrow" don't expect it as some car shoppers think they can just walk in and out without getting back to you.

Try and get their contact number so when they say they will come at a certain time but don't show, you can call them to see if they are still coming or not so you don't sit around wasting your time.

All car shoppers want the car with a RWC and rego. Are you willing to give it? If so set the price higher to cover yourself on the cost, if not, lower the price and let them deal with their own RWC and rego.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

All Of The Above +...

Ask one of your mates to follow your car in his car &...

If the intending buyer comes with a mate or two, you only take ONE out at a time (lest there be bravado between mates) &...

Just as you need to sign a contract before a parachute jump, you can get him to sign YOUR CONTRACT as follows...

1) you as driver must supply your car licence #.........

2) you must have another document to prove that the licence address is current (since people move around every couple of years)

3) you must not exceed the speed limit

4) if you commit a traffic violation eg. stop sign, speed camera etc., you are responsible

5) you are allowed to inspect logs and receipts, but nothing must be removed or taken away

6) you allowed to bring a mechanic, but nothing can be dismantled or removed unless I approve and am present

7) you are not allowed to exceed the rev limiter/red line

Signature...................(him)

Witness.....................(you)

Date..........................

Hope this helps,

Tez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • GTSBoy
      Airbox for +T

      By GTSBoy · Posted

      By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • BuiltNotBought
      Airbox for +T

      By BuiltNotBought · Posted

      There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...