Jump to content
SAU Community

Real Time Gps / Gprs / Gsm Car Tracking Alarm


Recommended Posts

G'day guys.

These are from Deluxe System Alarms. There based in Taiwan

GB: START 6/11/08 ENDS 15/12/08

What i found was this GPS/GSM ALARM

Here are the details:

Real-time GPS GSM GPRS Tracker. It can be used for tracking vehicles, boats and any other movable targets. All you need to do is send a simple SMS with your password to the unit, and it will send its current location/coordinates to your mobile phone including its speed if it's on the move, you can then enter the GPS coordinates on online maps such as Google Maps, Google Earth, etc. to find out where it exactly is. In areas where there is no GPS signal, it will send you the location of the nearest GSM Network Switch Center Code and GSM Towers Code which you can also use to find its location. The unit can use any GSM sim card worldwide including prepaid sim cards and all you have to pay is the cost of sending the SMS, no subscription needed, you are in complete control of it.

Function Description

- Built in GSM module (900MHz/1800MHz) and GPS Receiver

1. Real time position tracking through SMS of mobile phone.

2. Car owners can exactly position the car with GPS. (the latitude and longitude, location/ driving direction and speed can be sent to mobil phone)

3. Anti-burglar, anti-hijacking and anti-destroying

4. Automatic SMS and alarm type can be provided when your car alarms.

5. Cut off the car power/fuel supply by SMS, to stop the car

6. vibrated or started illegally ,call automatically back to car owner.

7. Monitor the sound around the car via telephone

8. Remote control by telephone (unlock/ lock car door, oil & power circuits)

9. Wire-cutting Prevention , call /SMS /sound back to car owner about power failure.

10. Multiple triggering: Door open triggering, vibration triggering, power-off triggering,

ignition triggering

11.With English sound prompt, easy to operate. No need monitor terminal and platform , free service charge.

12. remote operate car. Wherever you are, you can lock your car by pressing the button.

13. Equipped with GPS function, it can show the position of your car wherever you are.

Among many others, Google Maps are also mostly free and easy to use. Just use this link:

http://maps.google.com.au/maps?hl=en&tab=wl

The unit also comes brand new in a box with GPS and GSM antennas, as well as the instruction manual.Similar units on the market sell for over $700.

This gb will end in about a month or before if we can get the numbers.

Ordering To order the GSM/GPS ALARM , please PM me with your details.

Feel free to ask me any questions.

Also this is a price break i was given if more than 10 units are ordered.

1 - 10 Units $365 + $20 shipping via express post with tracking.

11 - 20 Units $345 + $20 shipping via express post with tracking.

20+ Units $325 + $20 shipping via express post with tracking.

Please note: Once the GB has finished it will take 2-3 weeks to ship, allowing stock to come in from oversea's via airfreight and getting it shipped to you.

So who wants to start the list.

1) R33 KID

post-27391-1225937520_thumb.jpg

GPS_GSM_User_Manual_1_.pdf

Edited by r33kid

I have an Australian supplier that can do the same thing at $325/unit without requiring 20+ and the Antennas used are invisible, so as not to draw added attentio, and no postage.

Edited by turbo_brian

You wont know the supplier, he is a personal friend of mine, and the best man at my up coming wedding, but we are both screwed from behind anyway with this group buy....

http://www.skylinesaustralia.com/forums/Re...Ca-t200630.html

He knew that already. Didn't you notice that he plagiarised that thread?

Both are selling the same unit, the only plagiarising was from the manufacturer's specifications, nothing is original from the poster.

B.

the other one that was $275 or whatever was not the alarm just the DSM/GPS, you had to wire it into your existing alarm so you guys are competitive pricewise given yours has the alarm included

  • 2 weeks later...

Looks pretty mad. but i dont know if id trust something like that overseas. do you know anyone in aus who has it? r something similiar?

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...