Jump to content
SAU Community

Set Of 4 Koni Shocks And Springs For R32 Gtst

Bennett
 Share

Recommended Posts

Bennett Mentor

Bennett

Posted
Posted

Hey guys,

Swapped my JIC coilovers for a set of 4 KONI shocks and springs and a set of 4 TEIN shocks and springs. TEIN's are in the car so the koni's are up for sale.

Had them in the car for a few days to see how they go and they seemed really good. Sexy low ride height, damper adjustable all round, firm but not too stiff, no leaks or knocking. Look clean and in good condition.

Got teins in as i cant afford to atract much attention with the low ride height now and they are a bit softer (i need a break from the stiff jic's lol).

Asking $400 but negotiable so make me an offer.

Located south eastern suburbs of melbourne.

PM me or reply here. Mobile is 0423712016

If you need any photos just send me your email or come and inspect as im now on holidays.

Bennett Mentor

Bennett

Posted
  • Author
Posted

Here are pics of the shocks and springs. You can compare the differences between 32 and 33 shocks from them.

They are the yellow KONI's, not sure of spring rates. The front sits just above the wheels and the rear sits just below the top of the tyre.

This was with 255/40/17 on.

http://img440.imageshack.us/my.php?image=dsc04541sn5.jpg

http://img522.imageshack.us/my.php?image=dsc04538ti8.jpg

http://img152.imageshack.us/my.php?image=dsc04539vq2.jpg

Bennett Mentor

Bennett

Posted
  • Author
Posted

PMs replied.

Call me or send a message any time to organise a time to come check the set out and make an offer.

I'm very negotiable atm as i need money right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      iPad gauge cluster

      By PranK · Posted

      Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...