Jump to content
SAU Community

Recommended Posts

Hey guys,

Getting a new rear wheel bearing for the R34. It seems no one has done this on these forums and written about it.

Can any one advise on if the bearings listed on ebay will also fit a R34? I will post the link.

I have already ordered from Victoria and fingers crossed it will work.

Can anyone confirm?

http://cgi.ebay.com.au/NISSAN-SKYLINE-SILV...rts_Accessories

The seller is 99% sure it will fit and tells me the shaft size, does anyone know the shaft size for GTT rear wheel?

Its meant to look like this

http://www.skylinepart.com/ekmps/shops/jap...es/img_1316.jpg

Anyone help?

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/
Share on other sites

Nissan are useless. Went from quotes between two places from $255 and $280 they would match it at the other place however.

Rockdale Nissan would not supply a product code and was anoying the shit out of me, however with a VIN Artarmon will match it, Thank god!

Anyway thanks to all who helped, Bearings aftermarket dont exist for the R34!

Cheers

Nathaniel

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4266253
Share on other sites

did you then click the find part number? Because thos numbers there arnt actual part numbers just a description, as they are both hubs for example.

You're right, i bollocks it up. Ignore previous post.

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4268697
Share on other sites

Got the Part number from nissan today (had to pay $255 to get it.. i.e buy the part before they would supply a code - have to love Nissan)

The part number supplied was correct, however a friend has installed it on his R34 and the bearing is the wrong size. He made a fitting to fit within it.

Looks like a giant game of shambles.. I am not looking forward to fitting it.

Thanks again for the help Kotter

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4271958
Share on other sites

is 255 for both sides of the rear or just one?

jebus...

also why are you replacing them? i've never heard of the wheel bearings go in any skiz to date, unless they were smashed.

On a side note, make sure you correctly fit them. Buggered wheel bearings = wheel comes off

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4272056
Share on other sites

Just one.. Ball bearing in a housing rip off! Cant drive it like this tho!

Yeah they are buggered as atm .. So will have to put them in correctly.

I hit a curb, drive with bad camber and often use the handbrake.. this is why.

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4272643
Share on other sites

had a front left go in my gtst. It's not uncommon. The front right in my s13 sounds like it isn't too healthy either.

They will all let go eventually. Add extra load (track work, big offset) and it will be sooner rather than later.

Seriously though. All the bearings in the car will most likely be manufactured by NSK. And all of their bearings have a number stamped on them. Take that number to any bearing supplier and they will be able to get the right one.

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4274166
Share on other sites

  • 1 month later...

from memory 38-40mm shaft i believe.

you should really replace both sides mate as if ones gone other wont be too far...... you can get a much cheaper price from bearing places than nissan as ntn supplies bearing for nissan so same thing just maybe diff part numbers

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4358831
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List:
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
    • Just yesterday the car started to shake a bit when idle. So tomorrow ima test the some wires and packs with the multimeter and see what it is. Hopefully is a pack because thats the easiest thing to buy same day here where I live in the USA.
    • shot myself in the leg and now last night I have shaking when I idle lol
×
×
  • Create New...