Jump to content
SAU Community

Recommended Posts

Hey guys,

Getting a new rear wheel bearing for the R34. It seems no one has done this on these forums and written about it.

Can any one advise on if the bearings listed on ebay will also fit a R34? I will post the link.

I have already ordered from Victoria and fingers crossed it will work.

Can anyone confirm?

http://cgi.ebay.com.au/NISSAN-SKYLINE-SILV...rts_Accessories

The seller is 99% sure it will fit and tells me the shaft size, does anyone know the shaft size for GTT rear wheel?

Its meant to look like this

http://www.skylinepart.com/ekmps/shops/jap...es/img_1316.jpg

Anyone help?

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/
Share on other sites

Nissan are useless. Went from quotes between two places from $255 and $280 they would match it at the other place however.

Rockdale Nissan would not supply a product code and was anoying the shit out of me, however with a VIN Artarmon will match it, Thank god!

Anyway thanks to all who helped, Bearings aftermarket dont exist for the R34!

Cheers

Nathaniel

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4266253
Share on other sites

did you then click the find part number? Because thos numbers there arnt actual part numbers just a description, as they are both hubs for example.

You're right, i bollocks it up. Ignore previous post.

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4268697
Share on other sites

Got the Part number from nissan today (had to pay $255 to get it.. i.e buy the part before they would supply a code - have to love Nissan)

The part number supplied was correct, however a friend has installed it on his R34 and the bearing is the wrong size. He made a fitting to fit within it.

Looks like a giant game of shambles.. I am not looking forward to fitting it.

Thanks again for the help Kotter

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4271958
Share on other sites

is 255 for both sides of the rear or just one?

jebus...

also why are you replacing them? i've never heard of the wheel bearings go in any skiz to date, unless they were smashed.

On a side note, make sure you correctly fit them. Buggered wheel bearings = wheel comes off

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4272056
Share on other sites

Just one.. Ball bearing in a housing rip off! Cant drive it like this tho!

Yeah they are buggered as atm .. So will have to put them in correctly.

I hit a curb, drive with bad camber and often use the handbrake.. this is why.

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4272643
Share on other sites

had a front left go in my gtst. It's not uncommon. The front right in my s13 sounds like it isn't too healthy either.

They will all let go eventually. Add extra load (track work, big offset) and it will be sooner rather than later.

Seriously though. All the bearings in the car will most likely be manufactured by NSK. And all of their bearings have a number stamped on them. Take that number to any bearing supplier and they will be able to get the right one.

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4274166
Share on other sites

  • 1 month later...

from memory 38-40mm shaft i believe.

you should really replace both sides mate as if ones gone other wont be too far...... you can get a much cheaper price from bearing places than nissan as ntn supplies bearing for nissan so same thing just maybe diff part numbers

Link to comment
https://www.sau.com.au/forums/topic/244969-wheel-bearings/#findComment-4358831
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...