Jump to content
SAU Community

Recommended Posts

Thinking of selling up mods to the car are as follows

ENGINE: 356 rwkw @ 1.4bar

-RB27DET-

Just clocked 50,000 original K's, done much much less since re-build

Nismo N1 bottom end

Nismo N1 RB26 crank

Nismo N1 RB26 oversized forged pistons

Nismo N1 RB26 conrods

RB26 waterpump

Tomei Adj Cam (inlet)

HKS Adj Cam (exhaust)

HKS step 3 cams 272 deg

Trust Timing Belt

Apexi RX-6 turbo (ISAMU SERIES)

Custom Manifold

3inch Dump Pipe

50mm Apexi external gate and screamer

Greddy type r BOV (race spring)

Greddy Plenum

800cc injectors

Q45 infiniti throttle body 90mm

BTR Custom intercooler 650x300x140mm

BTR Custom radiator

BTR Custom oil cooler

3inch piping to turbo and inlet

Blitz SUS pod with titanium inlet

SUSPENSION:

Crux coilovers

S.W.I.F.T springs 14kg front, 12kg rear

IKEYA FORMULA lower control arms (brand new)

IKEYA FORMULA castor rods (brand new)

GTR rear strut brace

Cusco front strut brace

BREMBO brakes - upgraded front rotors + endless circuit pads and spares

FUEL SYSTEM

full external fuel system running to an internal fuel tank

650hp rated external fuel pump

2.5ltr swirl pot

EXTERIOUR/INTERIOUR

Trust/Gracer front bar

BN sideskirts

BN rear bar

Fresh paint custom black over blue

Custom tow hooks front and rear

Velo Apex race seat - fixed back

Hydraulic handbrake

Full Cage - 10point

Harness

All the important gauges to keep an eye on everything

+ many many many more things, cant remember it all

Around $20k

car is in S/E but willing to ship interstate at buyers expence

0433663833 or pm

post-34936-1226876364_thumb.jpg

post-34936-1226876696_thumb.jpg

post-34936-1226876848_thumb.jpg

post-34936-1226876970_thumb.jpg

post-34936-1226877125_thumb.jpg

post-34936-1226877248_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/245133-r33-track-monster/
Share on other sites

Asking for a friend who's after something

How many km's since the rebuild? (im assuming they are all track kms yes?)

Why is it RB27 with no mention of a stroker, how far was the block bored???

Who did the rebuild?

What ECU setup?

Is the cage AUS approved or is it a Jap one?

Asking for a friend who's after something

How many km's since the rebuild? (im assuming they are all track kms yes?) car has less then 50,000 on it, the rebuild was done just before it came into the county so about 8,000 i beleave...

Why is it RB27 with no mention of a stroker, how far was the block bored???it is a rb25 with 26 bottom end offten referd to as a rb27

Who did the rebuild?Garage acua

What ECU setup?HKS Fcon

Is the cage AUS approved or is it a Jap one?cage is a bolt in but came over from japan like that

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...