Jump to content
SAU Community

Recommended Posts

IMO

just let ur car warm up. thats all I do. and havnt had a problem yet. (touch wood), i think you would only need this in really cold climates. also comes down to the type of oil you are using, and i would imagine you would be using some full or semi synthetic type of oil so you should be ok.

my recommendations for track work or at least your first outing

- turn the boost down, turn it down a few PSI - youll still make tons of power

- watch oil temp & water temp (Get a warning light for these)

- watch knock - make sure engine check lamp works and your knocking warning is turned on

- run 100 ron if you can as insurance policy

- check tyres, pads and rotors before track day

- if your running semi comp rubber get some advice before using them

- oil cooler is critical

-- dont get a cheap junker kit, get a trusted japanese brand kit to suit ECR33

-- this will ensure correct fittings, right hoses etc

-- any failure / risk in the oil system puts the engine at great risk

heat will be your biggest problem. heat in the pads, rotors, calipers, turbo housing, dump pipe etc

thanx paul, i'm putting on a trusted kit fer sure, i dont run any cheap parts on my car :yes:

boost is always on my actuator's minimum for extended thrashings... (1 bar)

oil is slightly overfilled

everything else is always checked :P

Don't worry about your oil temps around the streets not getting hot enough quick enough.

use good quality oil and that's all that's required. There are HEAPS of us getting around with oil coolers and no thermostats.

The highest wear and tear time on an engine is at initial start us, for those first few seconds before oil pressure is 100%, and there's nothing a thermostat can do for that.

for an update im also drilling a custom oil return from the head to the sump :P

if i go for a thicker head gasket to lower compression, how much power can i pick up up top vs losing response?

the car is already very responsive (full boost of 20psi by 3500) so i do have a little can afford to lose i spose...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...