Jump to content
SAU Community

Recommended Posts

I took a friend who owns an A4 1.8T for a spin in my car, and he was blown away (like, "holy shit!" type stuff :wave:) My R33 only had around 185rwkw at the time. He also took me for a spin in his A4 and it didn't seem all that quick so I could understand why he was so impressed. But then, I've never gone for a ride in a stock Skyline before so who knows :)

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

I dissagree, stock for stock a skyline feels way beefier than a 1.8T A4.

Im just getting happier with the level of power I have now, which includes a chip to up the boost, exhaust, electric fan kit and air filter. It *probably* makes around 155kw at the fly.

So a stock skyline should still beat it, in the dry.

But there are some quick ones around.

I just looked up the A3 and A4 turbo specs and I can't figure out why anyone can think they are fast cars. They put out either 110 (A3) or 120 (A4) kw, that's at the flywheel. The only thing going for the A3 is its weight which is 1175kg which I guess isn't too bad for 110kw, but the A4 is a slug at 1415kg.

The 3.0 engine versions are a lot more respectable at 162kw, which is starting to get into the realms of "quick". But I would think that unmodified, any GTS-t would smoke any turbo A4, and probably an A3. Maybe the A4's that win aren't as unmodified as people think? Or maybe they had the 3.0 engine in them.

The A31.8T is NOT a quick car, well it is compared to an excel.

Lets get this straight.

The 1.8T engine is the only one worth much consideration.

The A3 and A4 use basically the same engine with the same output 110kw. These use a ko3 turbo.

In 1999 the A4 had upped boost and with variable timing i think, had 132kw.

With a chip all of these 1.8t's wheather they are an a3 or a4 will have ~150kw and 300nm of torque, from about 2500rpm.

The S3 has the same basic 1.8t engine (with a few stronger bits) but with a k04 turbo, the old S3's made 154kw, the new ones 165kw/280nm. With a chip these will make about 195kw/360mm.

The S4 is a 2.7litre v6 twin turbo using 2 k03 turbos combined (not sequential) factory these have 195kw/400nm torque 1850-3600 rpm.

With a chip these will make 250kw.

Then there is the rs4 which makes 280kw i think, its a 2.7litre but with k04 turbos instead of the k03's. Chipped these make 330kw.

A common mod in the A4 is if the turbo goes, replace it with a k04.

But what you skyline guys have to watch out for the A4's with garrett GT25's. These make around 250kw i think depending on the trim.

There is one A4 going around, no need to tell you specs just look at this timeslip:

Fast A4

Any more questions?

Originally posted by Pekatu

Man i owned an Audi A4 Quattro turbo before my skyline, if you dont get an S4 you will be very dissapointed in the performance!!!!!!!!!!!!!!!

Do a little bit of work to them and they arn't that slow. But are not as easy to mod as skylines. But then again what is!

The 4WD in the A4 is awesome.

They are a damn sight rarer than the 1,000,001 skylines on the road. That why I chose the A4 after having my heart set on a Skyline.

They are also comfy.

But no electric folding mirrors :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...