Jump to content
SAU Community

Pitctures From The Aue Tcc Round 3

tacker

By tacker,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Roy Grand Master

Roy

Posted
Posted

Cool pictures. I am working in India at the moment and get 4 day weekends at the end of every month where i get to go for a roam to wherever i like. Whats the calender of upcomign events? I wouldnt mind dropping over to Dubai, catching a beer and motorsport

tacker Mentor

tacker

Posted
  • Author
Posted

roy on the 5/12 we have the FIA GT series in town with the F2 and speed cars with all the ex F1 jockey

next round of the UAETCC is on the 19/12 with the radicals and bikes

pic are really good i thought lots of guys bring their hobbie to the track and you see the result with the pics

tacker Mentor

tacker

Posted
  • Author
Posted

Try as i might, with the car single spinning i could not get past the 996 turbo which is reputed to be pushing out 600hp. Must be close to that figure as mine is some 540hp and it would pull away from me in a straight line.

But the orange EVO was just awsome, the motec data logging showed this thing was going from 123kph to 274kph in less than 8 seconds and pulling over 1.8 g in some corners which is more than any British touring car according to motec. Truely a brutal car to drive.

tacker Mentor

tacker

Posted
  • Author
Posted

i relocated the intercooler further forward and down about 100mm in each direction. I then sealed the bottom of the intercooler to the bottom of the radiator with alumimimum sheet which has increased the air flow through the rad by 18% by area if you measure from the bottom of the intercooler to the front lip of bonnet vs the height of the rad alone. Seems to be working as car is happy to sit at 96 degrees for a 20 minute race. And over here thats a feat in its self.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...