Jump to content
SAU Community

Beach To Burger Crusie Wrap Up 27/11/08


Recommended Posts

Cruises aren't the ONLY thing members are interested in... and most financial members that adhere to our rules are not overly interested in going to krispy kreme type meets (not really a cruise imo anyway). There's some very good reasons why our meets/cruises are run different to NS type meets. Anyway I don't want to get into an hour long argument about that.

Organising a cruise also involves going on the 4-5 hr trip beforehand to check out the roads/route (and its probably longer than that). Plus admin stuff for the cruises, insurance and so forth.

And being an events co-ordinator, is not just a couple of hours every Fri night.

It's easy to be critical when you aren't in the position yourself and you don't really understand what's happening behind the scenes.

To be on general committee you need to be able to get along with the rest of the committee, set a good example to other members, uphold the values of the club, do the right thing by the members and enforce the rules so noone ruins it for the rest of us.

If you are serious about being on general committee, rather than trying to rally support of the members, I would suggest you perhaps send a brief email to the exec committee ([email protected]) stating your interest and what help you can bring to the club/committee. Its likely some of the current exec committee will be in those positions again this year.

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

Cruises aren't the ONLY thing members are interested in... and most financial members that adhere to our rules are not overly interested in going to krispy kreme type meets (not really a cruise imo anyway). There's some very good reasons why our meets/cruises are run different to NS type meets. Anyway I don't want to get into an hour long argument about that.

Organising a cruise also involves going on the 4-5 hr trip beforehand to check out the roads/route (and its probably longer than that). Plus admin stuff for the cruises, insurance and so forth.

And being an events co-ordinator, is not just a couple of hours every Fri night.

It's easy to be critical when you aren't in the position yourself and you don't really understand what's happening behind the scenes.

To be on general committee you need to be able to get along with the rest of the committee, set a good example to other members, uphold the values of the club, do the right thing by the members and enforce the rules so noone ruins it for the rest of us.

If you are serious about being on general committee, rather than trying to rally support of the members, I would suggest you perhaps send a brief email to the exec committee ([email protected]) stating your interest and what help you can bring to the club/committee. Its likely some of the current exec committee will be in those positions again this year.

I agree 100% with you if you are referring to the position that Wayne has.

However what Kris is talking about is the sub-event organiser positions which Dezz and AP were assigned to.

Basically Ash posted up a thread asking for help and these two were the first to raise their hands for the position.

Hope that clears up what type of event organiser position Kris and myself are interested in becoming a part of.

Cheers

I agree 100% with you if you are referring to the position that Wayne has.

However what Kris is talking about is the sub-event organiser positions which Dezz and AP were assigned to.

Basically Ash posted up a thread asking for help and these two were the first to raise their hands for the position.

Hope that clears up what type of event organiser position Kris and myself are interested in becoming a part of.

Cheers

Again, goes to show just how little you know about what goes on behind the scenes.

Not to worry though, I feel no need (and I doubt AP does either) to justify myself to you, Kris, or anyone else that would like to pipe up.

Again, goes to show just how little you know about what goes on behind the scenes.

Not to worry though, I feel no need (and I doubt AP does either) to justify myself to you, Kris, or anyone else that would like to pipe up.

This burger cruise was planned by kris, ap and myself and then was posted online seconds after the conversation. Although this doesn't fall into the lines of an official sauvic cruise (with insurance, licenses etc) it was still regarded as an sauvic event (reviewed during general meeting).

This is where some of the confusion has come through due to no "behind the scenes" planning.

All im interested in is helping in planning little events outside of cruises (dinner, gokarts, paintball etc) just like this burger meet...

Hope this clarifies any issues

man, this smells like the americans voting for a new president.

people getting dirty on each other, taking sides.

im pretty sure we will vote in who we think will do the job right.

this is a community of mates who share the same passion. not a dictator ship on who gets to plan the next event.

i get where your coming from Patrick, mini-events that dont, run the risk of the public with a convoy of cars coming through there town (i dont know the behind the scenes to cruise's)

,days of planing, test runs, getting the all clear from who ever it may concern yada yada yada.

there is a 'voting' system in place im lead to belive, which will give the committe a third opinion on what we want as members, for this club to run smoothly.

i dont know many of you personally, but as of right now Dezz is still in rank, and Kris you need to take another angle into getting people to see things your way and score some 'votes'.

just my 2cents .......... ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...