Jump to content
SAU Community

Recommended Posts

Hi

Wanting to upgrade fuel pump in my R33 GTR, I want something that sits in the factory position and clips in like the stock fuel pump does

Besides the Japanese pumps, TOMEI, NISMO, SARD etc which are like $400 + is there any other pump that can use the standard mounting bracket, in maybe a BOSCH model?

Don't mind if it has to be modified 'slightly' as long as it sits as the factory fuel pump does and flows like a NISMO/TOMEI etc

Any help would be appreciated

Thanks

Link to comment
https://www.sau.com.au/forums/topic/246782-r33-gtr-fuel-pump-upgrade/
Share on other sites

the japanese pumps, nismo, tomei etc are well worth the money. in both of my heavily modified GTRs I used japanese pumps and couldn't be happier. they fit straight in in about 10mins. sure you can hack up your cradle to fit a bosch pump, but the number of times I've seen people fit an aftermarket pump to the stock cradle and then get fuel surge due to improper mounting is insane. considering how important good fuel supply is I would spend the extra few bucks and get a nismo one.

out of the japanese fuel pumps, which do you beleive is the best choice?

they are all much of a muchness. i've used nismo and tomei and hks. if I had to buy one now, I think i like nismo the best. dunno why, I just have an image of them being slightly nicer quality. but in reality there is bugger all between them.

they are all much of a muchness. i've used nismo and tomei and hks. if I had to buy one now, I think i like nismo the best. dunno why, I just have an image of them being slightly nicer quality. but in reality there is bugger all between them.

Probably the best thing about Nismo is that 99.9% of the time is going to fit perfectly.

well i just fitted a gen. walbro fuel pump..rated at 550hp..

its like half the size of my stock fuel...

it was the BEST fit...and i didnt think it would..but wen i saw the pump..i was lik wow!...lol

which is way smaller than an bosch 040!!!!!

but i drive a gtst...

But i was gona buy a tomei one..its lik an extra 100ish bucks...

but its really up too u..

it fix a lot of flat spots after installed too.. :P

Thanks for that Adam

Anyone put a BOSCH 044 into an R33 GTR tank?

I put one in a 32 GTR tank; I don't know how different they are internally to the 33 tank.

I wrote a tutorial on it and someone was kind enough to take photos, you'll find it in the DIY section

It may be of some help, I don't know.

In a 32:

* It is not a drop-in replacement (cutting/fabrication/adapters needed, but the work is pretty simple).

* It is as quiet as the standard pump was.

* It flows more than enough fuel at ~65psi (something that walbros seem to struggle with).

If you can verify that your aftermarket pump of choice:

* flows enough fuel at the target pressure

* is a drop-in replacement

I'd go down that path. Drop-in replacements are always that much easier to deal with and you can always go back to standard anytime you want to.

Regards,

Saliya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
    • HG's high flow is not "bolt on". The core is shorter, moves the comp cover rearwards in the engine bay. means you have to deal with the inlet plumbing a little bit. This is probably something to consider with every "bolt on" turbo anyway.
×
×
  • Create New...