Jump to content
SAU Community

Recommended Posts

hey scandy, howd things go with the boost gauge?

I just got a defect caution for having one on my A pillar. My mechanic said I should be able to keep it but its currently slightly too high up. The police officer however disagreed with taht also and said I couldnt have it on there at all. I really dont wanna get rid of it all together but I dunno where else I can put it.

Any ideas guys?

hey scandy, howd things go with the boost gauge?

I just got a defect caution for having one on my A pillar. My mechanic said I should be able to keep it but its currently slightly too high up. The police officer however disagreed with taht also and said I couldnt have it on there at all. I really dont wanna get rid of it all together but I dunno where else I can put it.

Any ideas guys?

dunno. havent gone through yet. always heard that a piller is illegal though.

some where below the line of the dash instrument cluster.....perhaps modify it to sit where the cigarette lighter goes or somewhere like that

mine *was* below the dash line...

hey scandy, howd things go with the boost gauge?

I just got a defect caution for having one on my A pillar. My mechanic said I should be able to keep it but its currently slightly too high up. The police officer however disagreed with taht also and said I couldnt have it on there at all. I really dont wanna get rid of it all together but I dunno where else I can put it.

Any ideas guys?

Well you can't have it on the pillar, on the dash above the steering wheel, behind the steering wheel on the column or below the dash where your legs are, as these are all 'crash zones'.

Legally, just throw it on the centre of the dash like what some HSV's or FPV's have... That's legal. Otherwise you'll get hassled.

My gauges are legal cause they are velcroed down and not bolted. They are also ontop of the dash. The inspector at lonsdale wrote on my defect notice they are legal since they are velcroed so if I do get questioned I've got it in writting saying there ok :ermm:

My gauges are legal cause they are velcroed down and not bolted. They are also ontop of the dash. The inspector at lonsdale wrote on my defect notice they are legal since they are velcroed so if I do get questioned I've got it in writting saying there ok :(

so does that mean you can have them on your dash as long as they are velcroed down?

Thats where mine are. He was about to tell me to take them out on the spot but then noticed the velcro and said they are fine.

So i guess u can have them on ur dash. I just carry around my old defect notice if anyone asks.

post-38653-1263189026_thumb.jpg

Luke, yours is legal regardless if it's velcro'd, duct taped or bolted... it's not in any crash zone. Unless they've brought in new laws that state that area is a crash zone incase someone is sitting in the middle seat in the back, doesn't wear their seatbelt and goes flying forward.

Chad, yours is illegal. f**k knows how you got that through Regency, but that's the first place cops will look for a gauge and will defect you straight away... even if it's in one of those cup things. But, it all depends on the cop that pulls you over. I had a gauge there for ages and 2 cops didn't seem to mind yet another one did.

Where's the f**king consistency in this state?!

i read somewhere that they're changing the rules for where you can put GPS units now on the windscreen

they're talking about not being able to have it towards the centre of the dashboard, not in front of your driving position, and not up the top of the windscreen. so it'll basically be like mine, over by the a-pillar as low down on the screen as you can get it

apparently its to do with how theyre mounted. gps' tend to use suction mounts, gauges are hard mounted.

then the question gets posed

"what if you get a suction cup mount for your boost gauge"

still illegal. why? they wont answer

then the question gets posed

"what if you get a suction cup mount for your boost gauge"

still illegal. why? they wont answer

Clearly because the more information you have about the car, the more dangerous you are. I'm even getting rid of my speedo this week for this exact reason, should keep me nice and safe.

Clearly because the more information you have about the car, the more dangerous you are. I'm even getting rid of my speedo this week for this exact reason, should keep me nice and safe.

:O:P:) :) :) :) :banana: :banana: :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
×
×
  • Create New...