Jump to content
SAU Community

Recommended Posts

you can still re-register a defected car if you really wanted.

it has to be done manually rather then electroniclly so you must go into a rego office and they fill out a paper type rego.

once cleared, you take the paper form of rego to a rego office and they transfer the remaining rego to their computer and give you a legit rego sticker.

Yeah but to get the permit to get rego he needs to drive to the police shop, which he cant do without rego, unless it still has rego now?

Edited by DSTROY

nah, he doesnt have to deal with the cops first. a permit to drive from the cops would be useless if its not rego'd as even with the back of the defect paperwork is filled out your not legally allowed to drive a unrego'd car (stating the obvious, i know)

all he needs in a regency date before he goes into rego a defected car. the car does not have to be with you just your rego and defect forms.

they will check your regency date, or at least wait on hold for as long as they can stand and have to take your word for it.

once it has the manual rego filled out, he can get a permit from the cops (the back of the defect paper work filled out) to drive the car around while defected.

you are allowed to drive a defect car without a permit if you are going to the cop station to get a clearence to drive.

BE WARNED, if a cop pulls you over and the mods listed on defected paper work are not actually cleared, he holds all right to pull your permit to drive till your regency date an youll be up shit creek as your car will need to be towed.

i have done this more then my fair share. i used to always for some reason get defected just before my rego ran out :P

EDIT: i just re-read what you wrote chad. the rego office doesnt have to have a clearence on the back of the defect notice before giving temp rego. if thats what you meant?

Edited by Import S13

I got defected last week for ride height, the thing is my ride height was fine. the cop wasn't using a tape measure he was estimating using his notebook! i had know way to prove him wrong. so now have to go through rengency, what a joke.

I got defected last week for ride height, the thing is my ride height was fine. the cop wasn't using a tape measure he was estimating using his notebook! i had know way to prove him wrong. so now have to go through rengency, what a joke.

i got done the similar way.....except mine was a "suspected suspension damage" so i dont know whats worse...

i would just get it measured by a suspension place and if its all good challenge them in court i guess

cops notebook is 100mm tall which he runs under the lowest part of the car.......I had a similar thing happen to me when a cop followed my bike to JK's shop (Cara was there too when he went over the thing)....no defect though, instead he followed me back home to grab a poster for his kid, lol

Castor rod and camber arms are as far as I know. Mech 2 way is also, but I have known people to get through with one even with it chirping away in front of the inspectors. Sway bars should be fine. What does the tension rod do? Is it like a rear strut brace or something?

Edited by Rolls
Castor rod and camber arms are as far as I know. Mech 2 way is also, but I have known people to get through with one even with it chirping away in front of the inspectors. Sway bars should be fine. What does the tension rod do? Is it like a rear strut brace or something?

it bolts on the front infront of the sway bar to make the front end more rigid afaik

anyone know if the following are illegal?

non adjustable sway bars - fine

tension rod - not legal

rear camber arms - not legal

castor rods - not legal

2 way mech diff - if they can prove it :)

there you go mitch

i doubt they are different

gtr's run 10psi stock if im correct and im running an rb20 actuator which does 12 so it shouldnt be a problem?

there is no way they will be able to tell the difference, I don't think it will be an issue.

anyone know if the following are illegal?

non adjustable sway bars

tension rod

rear camber arms

castor rods

2 way mech diff

sway bar shouldnt be an issue, camber arms they'll fail you for because theyre rose jointed or some shit, tension rod/castor rod... same same? either way, if its adjustable, get rid of it, and if they question your diff chirping along, say it was recently rebuilt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...