Jump to content
SAU Community

Recommended Posts

I just got defected today driving my uncomplied unregisted r32 gtr from the mechanics back to my house on a permit.

I had no front bar because it was at the crash repairs getting some cracks fixed, and whilst i was driving it home my front right indicator fell off unknowingly.

the officer deamed the car unroadworthy and defected me. the car will be getting complied sometime in the near future maybe 3-6 months.

will this defect have to be removed (rectified) before i go to get complied or when its getting complied or after? or is it just nothing to worry about?

Thanks.

I just got defected today driving my uncomplied unregisted r32 gtr from the mechanics back to my house on a permit.

I had no front bar because it was at the crash repairs getting some cracks fixed, and whilst i was driving it home my front right indicator fell off unknowingly.

the officer deamed the car unroadworthy and defected me. the car will be getting complied sometime in the near future maybe 3-6 months.

will this defect have to be removed (rectified) before i go to get complied or when its getting complied or after? or is it just nothing to worry about?

Thanks.

i dont know the answer to this one mate but i too received a similar major defect on my unregistered (driving with permit) r32 gtst, i would really like to know what happens here?

  • 4 weeks later...

Hey guys,

My mate just got defected. The cop instructed him he had to get a hole in the dash and place the electronic boost controller unit within there to get the car passed through regency. He also was instructed it had to be done by a shop with recipts to show it. Apparently the officer seemed aggravated at the time. I know that boost controllers are a deflectable item, which leads me to believe the officer knew this and just wanted my friend to go through regancy twice and spend more cash. So what I'm trying to say is BEWARE, as this maybe a common trick.

Edited by Mr.Massive

Hey guys,

My mate just got defected. The cop instructed him he had to get a hole in the dash and place the electronic boost controller unit within there to get the car passed through regency. He also was instructed it had to be done by a shop with recipts to show it. Apparently the officer seemed aggravated at the time. I know that boost controllers are a deflectable item, which leads me to believe the officer knew this and just wanted my friend to go through regancy twice and spend more cash. So what I'm trying to say is BEWARE, as this maybe a common trick.

He doesn't have to do any of this, regency will inspect the vehicle and if they can't find the boost controller then they have to clear it. Make sure he does all his bushes and fixes everything else up though as they will always find something to pick on.

Edited by Rolls
  • 2 weeks later...

He doesn't have to do any of this, regency will inspect the vehicle and if they can't find the boost controller then they have to clear it. Make sure he does all his bushes and fixes everything else up though as they will always find something to pick on.

+ 1 to the bushes and anything that may be loose! Brother and myself both had to do these 3-4 years back, have kept the car practically stock ever since :/

was just wondering whether spacers are passable through regency :S

I don't think they are. Only possible way (guessing) would be if it is mechanically engineered but even that is beyond the original design. Any takers on this one?

a slip on spacer is dangerous and will always be illegal to run, bolt ons are different but just put stockies on, thats the simple answer

+1 Spacers are no way near legal. Be sure to play it safe, because you don't want to be revisiting that place.

Ironic isnt it that making your car safer is illegal.

eg. rollcages, coilovers, wider wheels ect........

even i see the stupidity in these laws and im 13, never driven or had any interaction with cops/laws other than a break in.

Sleeper Datto

edit: my spelling and punctuation sucks

Edited by sleeperdatto

there is a good reason most of it is illegal.

cages if you aren't wearing a helmet and a proper 5 point harness you can hit your head on them and they can cause more injuries in lower speed accidents. Wider wheels can change suspension geometry and make the car handle worse etc blah blah, if you do it properly it can make the car safer but half the time it wont. Coilovers might not have appropriate spring rates (eg 8kg coilovers) causing less traction due to the wheels skipping, lowering ride height stuffing up geometry making the car handle worse.

They don't make it illegal to piss you off, they do it for good reason, plus if you do it properly and ticked off by an engineer 90% of it will now be street legal

Things that genuinely make the car safer like proper rubber, good brakes etc are not illegal mods.

If by good brakes you mean bigger, i.e. bigger disks, new calipers, my understanding is they're illegal if they're not engineered.

I was also of the understanding that slip on spacers were legal if they were under a certain size (maybe 10mm?) then after that you had to go bolt on.

Didn't know boost controllers were illegal... is there a web site where all this stuff is detailed?

anything that alters the emissions of the engine is generally illegal and it is up to their interpretation of this as to what they ping you on, eg you'll get away with intercoolers etc but as soon as you up the boost, change turbo chargers, injection systems etc you need a full spectrum emissions test

you can call up regency and they will tell you everything, or do an application to modify vehicle and they will tell you exactly what needs to be done, most of it is hidden on the transport sa website but you have to dig around to find it.

edit:

a lot of them are listed here

http://www.vicroads....300/0/VSI22.pdf

and all the info should be able to be found here

http://www.infrastru...adr_online.aspx

If by good brakes you mean bigger, i.e. bigger disks, new calipers, my understanding is they're illegal if they're not engineered.

if they are ADR approved or came on a different model of the same car then they don't need to be

Edited by Rolls

hey guys, im buying my r32 from melb driving it back to adelaide. It has a few minor mods on it and im not really sure what exactly i gotta change back to stock to go through inspections.

heres the list of the mods:

Full GTR body kit

fibre glass gtr vented bonnet

350z anniversary wheels

Khumo KU19 front and KU31rear excellent thread

Projector headlights with Xenon Globes

R34 GTT OP6 turbo

HKS adjustable actuator set to 12psi

3" Dump pipe

3" Front pipe with flex

3" cat back exhaust to oval muffler

GREDDY front mount intercooler

GTR strut brace front and rear

GTR front seats

Illuminated Dash (red)

Solid Subframe bushes

kyb hill climb coilovers

slotted and drilled brake calipers

welded diff

All advices and tips will be much appreciated.thanks

Edited by stalways

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Try looking at Eibacb/H&R springs Thats what Gary sourced for mine.
    • Hey y'all! I'm curious about how y'all go about widebodying your cars. I noticed that when running a square setup, my front wheels are a bit more tucked in than my rear wheels. Not by much, maybe 5-10mm. This leads me to wonder - when I widebody, should I use narrower front flares and wider rear flares? I found a set of 40mm rear flares that I really like, and was thinking of pairing them with some 18mm front flares, but I don't want the car to look strange. How have others done this? Note, I'm in a sedan. Thanks!
    • And if it was anything other than an auto tranny part, it might be a problem. But seeing as all auto trannies belong in the recycling bin, it's fine.
    • I have an R32 Fenix rad. It is good.
    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
×
×
  • Create New...