Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

According to http://www.skylinesaustralia.com/forums/po...34-ss595-1-.pdf a 255 tyre will fit onto rims 7.5" - 9" with standard rim width being 8.5 (this is for 255/40/R17)

From what I understand it should be ok :blink:

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4292438
Share on other sites

According to http://www.skylinesaustralia.com/forums/po...34-ss595-1-.pdf a 255 tyre will fit onto rims 7.5" - 9" with standard rim width being 8.5 (this is for 255/40/R17)

From what I understand it should be ok :)

ok so what is the biggest i can go on 8-8.5 inch rim then so 2--/35/r18 on the rear

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4292466
Share on other sites

ok so what is the biggest i can go on 8-8.5 inch rim then so 2--/35/r18 on the rear

ok i want to get for the front 235/35/r18 and the back 255/35/r18 how much should i be looking at paying for 2 of each

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4294122
Share on other sites

ok i want to get for the front 235/35/r18 and the back 255/35/r18 how much should i be looking at paying for 2 of each

235/35R18 is an uncommon size, you would be better off getting 235/40R18 and 255/35R18.

Without specifying what brand or type of tyre you are looking for you cant possibly hope for a price, there is far to much price variance in the market.

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4295504
Share on other sites

a 255 on a 8.5" tyre is going to look pretty funny, like a 4wd rim lol

Thats a pretty silly thing to say. :rofl:

Im running 255/40R17's on 8.5" rims at the moment and it looks fine, it depends on what type / brand of tyre you have as to how physically wide it is and what wheel size is recommended.

I have personally compared two different tyre brands (which I wont name) in exactly the same size to each other side by side and there was nearly an inch difference in width.

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4295739
Share on other sites

lol what the f**k

so a 255/40 in one brand is a different width to a 255/40 in another brand?

come on. put the ice pipe down

Yes you read that correctly, well done.

Tyre sizes are only relevant within each brand, if you were to line up every single tyre available in 255/40R17 (for example) side by side you would notice that many of them were totally different physical widths.

There is no governing rule that says that if you make a tyre with 255/40R17 written on the sidewall it has to be exactly the same width as everything else on the market.

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4295788
Share on other sites

i had a set of 7.5"wide BBS wheels which had a total physical width of 8.12inches.

i highly doubt this variance will be consistant throughout brands. some may be accurate, depending on the shape of the wheel.

i'd assume this variance similarly carries through to tyres.

food for thought.

Edited by Tezzah
Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4295812
Share on other sites

i reckon you're full of shit bullet

tezzah, you don't run tyre from the absolute lip of the rim to the lip of the rim though the tyre goes into the rim inside that lip

I didnt say that...

I was making the point that how a tyre looks on a wheel cannot be judged by the width of said rim. the actual width of both tyre, and wheel must be known to make such judgement

and im +1 with bullet

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4296048
Share on other sites

i had silverstone's on my 9" wide rims 235/45r17....they looked a tad stretched but now i have some advan ad07's in the rear and they aren't as stretched so its true about different brands being different sizes.

i think 255 might be abit too much for 8.5". like it is the correct size but its more on the minimum fit. 255 can fit 10"-11" wide with stretch?

255 are also expensive so unless you really want to, 255 should be fine for 8.5".

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4296678
Share on other sites

i reckon you're full of shit bullet

tezzah, you don't run tyre from the absolute lip of the rim to the lip of the rim though the tyre goes into the rim inside that lip

Mick is well respected in the tyre industry so you might want to do a bit of research before you make a stupid comment like that.

Link to comment
https://www.sau.com.au/forums/topic/247017-rims-and-tyres/#findComment-4296901
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...