Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

r u serious??? was this with no other changes??

so, 165rwkw on BMT's dyno would equate to how much on a dyno dynamics dyno (roughly)????

Originally posted by meggala

to give you an idea how conservative the dyno is a 180 with a big turbo made 165 rwkw on this dyno and went to the auto salon dyno and made 225rwkw.

cheers

sam, who actually owns the GTST? you or benny? or someone else?

it's a weapon... i remember seeing those two big bird shredders on it... there was an old guy with a nice R33 GTST with one of the 2835R's and he was running low 12's... that Endless weapon should nail 11's for sure in no time...

I might drop in tomorrow and check out ya new place, i have to go to Epping to have my exhaust changed so i can pass an EPA test :D so i'll swing past on the way back!

Andrew

huh! ...

nice to see my car has some attention ..

Gearbox? ... think it's a Trust Gearset but who knows .. has not broken so I expect it to be HKS or something known to be tougher (I hear trust box's are not da best in town).

Rebuilt with new piston, o ring block, and some interesting bmt headwork to get that RB flowing just nicely... tried the standard gasket to see exactly what would happen, now going tomei 1.5mill as it's a bubblin'.

Standard 2.6ltr size with fat sump, fat fuel pump, 1000 cc injectors and some solid tuning ... yes, it sure was achieved on BP Ultimate ... but pumped at Calder when I tested at the strip.

Yes, should be able to bust 10's :D ... tried to get that on my second run at calder but snapped the axle ... hope to crack below 11.5 next meet...

Please save the techincal questions for the good Doc or the boys at BMT ... all i do is finance and drive tha thing :) ... tough job i know ... what can i say? ... 2835R Powered RB26's and GTSt's were made for a reason - I'm not doing anything fancy here, just bringing them together :D

Cheers,

Oyabun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...