Jump to content
SAU Community

Recommended Posts

Not wrong there! I sent my ECU up on a thursday to my father in-law to remove my Mines Chip, we got it the Friday. Took the day to remove all the epoxy and still had to cut the chip out! Gave it to Pete (half of PLMS) who works on the desk next to him, Pete checked out the Mines map which was leaned out in the higher revs, speed cut removed and had 4deg of timing added across the whole map (yes that is all Mines did) then he fit the NIStune board and sent it all back to me very well packaged on the Tuesday. I got it on the Wednesday. Overnight delivery Via registered post from SA to VIC = AWESOME!

Get mine tuned on Friday at Status Tuning, can't wait. Have the cable and software on my spare laptop too, it's very cool stuff.

i really cant believe it!!!

that change is only on your mines computer or is that the change done to all mines computers. caz my friend has a mines tuned computer and when placed on the car its like it revealed its true potential. the car got really aggressive.

the problem i find with the mines were i live the best we get is 90 octane and they are normally tuned for much more than that and in most cases it wont be tuned for your car. thumbs up to mines but hands up to nistune

so what about the mines skyline?

any new nistune rbs in the family and willing to share the experience?

haha i did 4 r32 remaps this week and a r34.... so theres another 5 "family" members out there :laugh:

any new nistune rbs in the family and willing to share the experience?

We have done over 60 nistune boards in the last 10month's since we have started using the softwear.

http://www.skylinesaustralia.com/forums/Ni...ce-t248718.html

some happy user's of nistune...

Can some1 explain what makes the remaps like this less suitable once the power starts to climb past a certain level? WHat does the remap have trouble doing?

Also is any software able to be programmed into the remaps ie launch control?

Cheers

James

PS: I have a dr drift remap and am very happy with teh results. While i was away at work my mrs fillied up with some 95 fuel. When i came home and took it for a spin it was boosting a lot less because of the knock control. Asked her what she done and found out about the wrong fuel. Could have ended badly for me!!

haha i did 4 r32 remaps this week and a r34.... so theres another 5 "family" members out there :P

I know it can be quite difficult to explain but is there a manual or some form of info that one can download to read up on what can be adjusted and played with and in what moderation can one change figures when tuning with nistune. the do's and don't s of adjusting timing and changing fuel maps and the works.

i am looking for something beyond base tuning. thanx in advance

I am using nistune and love it. You do pay more when compared to a remap/socket-ed ECU. But the ease of tuning thought the diagnostic port has in itself proven more financially beneficial in the long run when going to my tuner and him being able to make quick adjustments and not charging me due to having to remove the ecu completly.

For the record, I am running 650cc Injectors (abit over kill), FPR, Splitfires, Z32, GCG Rb25 High flow (17psi), Cam Gears, 3" Zorst no cat, FMIC making a reliable 210rwKW.

yeah i have heard nothing but good things about the chip i was just saying what he told

me the other day and im most likely getting one in the new year alright bond

and i think the chip itself is like $400

Edited by wannaslide
i really cant believe it!!!

that change is only on your mines computer or is that the change done to all mines computers. caz my friend has a mines tuned computer and when placed on the car its like it revealed its true potential. the car got really aggressive.

the problem i find with the mines were i live the best we get is 90 octane and they are normally tuned for much more than that and in most cases it wont be tuned for your car. thumbs up to mines but hands up to nistune

so what about the mines skyline?

Maybe it was just my tune. I read that Mines tunes the ECU to the mods that are on the car, i.e. If you have kakimoto exhaust, apexi turbos, blitz FMIC, SARD 600s, HKS Cam Gears, they will tune to that.

In my case that was what was done to the maps.

Trent tuned my NIStune last Friday and all I can say is WOW! The software is very very good and trent got as much as he could out of my car with current list of mods done. made 240kW and 388Nm on 14psi.

Next step is to check wheels on the turbos and see if they are ceramic or not, if not up comes the boost!

I am extremely happy with the NIStune as the car is now tuned for BP Ultimate instead of the 100 octane that Mines tunes for

haha i did 4 r32 remaps this week and a r34....

Last time I asked i got the following reply

"R32 - we can do any of them - RB20 or RB26. No probs there.

R33 - can't do any cos they went to a Hitachi micro.

R34 - we can do the RB25 but can't do the RB26 in the GTR."

is this still the status? no RB26 in R34?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...