Jump to content
SAU Community

Recommended Posts

hey guys, i upped the poundage on my std turbo (r33 gtst s1.5)

so now its running 12 pounds, last week when i put it up, i had virtually no lag,

now if i look at the boost gauge and let it sit on 0 pounds for about 3 seconds i have boost at my fingertips.

if i just accelerate without sitting on 0 pounds, it seams like there is no boost, no boost at all.

if any1 has diagnosed the problem b4 maybe they can point me in the right direction???

the clutch is on the way out, and i'm picking up a new heavy duty next week.

(just incase that info helps?)

much appreciated if any1 can help

Link to comment
https://www.sau.com.au/forums/topic/247753-angry-turbo-lag/
Share on other sites

Mate i think what you are feeling is the transition from vacuum to boost (pressure), the car needs some time to transform the air from vacuum and pressurise that same air upto your desired boost this is what is felt at around the 0psi mark. This reason also explains why it feels quicker if you sit at 0psi for a little bit rather than booting it.

Link to comment
https://www.sau.com.au/forums/topic/247753-angry-turbo-lag/#findComment-4301432
Share on other sites

If you boost gauge is sitting on 0(Assuming your lightly holding revs under load) then your turbo is all ready spooled up quite abit so of course you will have instant boost.

On idle you will be in vacume so it will take time for boost to build up.

Link to comment
https://www.sau.com.au/forums/topic/247753-angry-turbo-lag/#findComment-4301444
Share on other sites

when putting it under load with the gauge sitting on 0, i can feel the pressure when i push my foot down an let the turbo work.

but when taking off from idle to load, if i dump it i can't really feel the pressure from the turbo, even tho my gauge is telling my there is 12 pounds there.

(if that made any sense)

Link to comment
https://www.sau.com.au/forums/topic/247753-angry-turbo-lag/#findComment-4301512
Share on other sites

when putting it under load with the gauge sitting on 0, i can feel the pressure when i push my foot down an let the turbo work.

but when taking off from idle to load, if i dump it i can't really feel the pressure from the turbo, even tho my gauge is telling my there is 12 pounds there.

(if that made any sense)

Clutch

Link to comment
https://www.sau.com.au/forums/topic/247753-angry-turbo-lag/#findComment-4301725
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...