Jump to content
SAU Community

Recommended Posts

As I understand it, the main reason for using a turbo timer on a turbo'd motor is to give the turbo's a little time to spool & cool down before stopping the flow of oil to them.

I personally can't see any reason for a turbo timer on a N/A, except for trying to mislead others into thinking you car is turbo'd!:P

anycar would benefit from a cooling down, but its not as needed in NA cars, i think the Apexi turbo timers (some of them) have TUrbo and NA on their packaging....Rice factor for NA cars.

Turbo cars should cool down because the turbo runs very hot, and oil is needed to extract the heat away. Leaving the car in idle allowes the oil to circulate through the turbo

if your going to put a turbo timer in a n/a , F*uck off the Apexi shit not worth the $$, go to jaycar and get 1 for $20 that u make your self that keeps you car running for 30sec after u turn it off.

personaly it's a rice factor for n/a cars.

but i would do it coz i'm rice

(chicks may think it's cool, i dont know)

haha its ok guys i was never actually considering getting one, waste of money and completely unnecessary. i was just curious if there was a reason for it saying on the package "for turbo and n/a models" - like if there was any benefit in running a non turbo car for a bit after you stop. i usually run it for about 30 sec after i stop just while i grab shit off my back seat, tidy things up a bit etc

anyway thanks for the replies :)

I use my turbo timer to warm up the engine, b4 driving.

Turn the engine on, set timer for 10 min, take keys out, lock doors, go back inside house, get ready to go out, eng. is nice and warm and has suffered the least stress. (most wear and stress on an eng. is caused with-in the first 10 min.) If i take longer to get ready, the eng. turns off, but will still be at full operating temp. by the time i get in the car.

PS: Don't forget to put the key into the ignition b4 putting car into gear. :D

Jimbo2000, i was pretty sure that nos as an oxidising agent, also cools the charge of air as it reacts and then combusts?? therefor the car shouldnt be any hotter? please correct me if im wrong?

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...