Jump to content
SAU Community

Recommended Posts

hello everyone, my engine oil level is touching low on the dipstick. i am thinking to topping it up myself rather than do a service at the mechanics.

Can i just top it up with a different kind of oil? as i have no idea what oil the previous owner use. as for the gear box and diff oil i suppose im not "mechanically minded" engouh to do it myself.

p.s. any recommandation of Oil? :P its a RB20 :P

Thanks

Link to comment
https://www.sau.com.au/forums/topic/248191-do-i-need-to-drain-my-engine-oil/
Share on other sites

Hey mate,

Best to drain it, will get rid of the old black oil. It wont take you that long to do. Just undo oil cap then undo the sump bolt and let it drain out (into an oil pan of course lol) replace the copper washer on the sump plug and put it back in.

Also, how long ago was your last service?

Cheers

J

Edit, check this link out.. heaps of helpful info and Tutorials

http://www.skylinesaustralia.com/forums/Li...p;hl=oil+change

How did you let the engine oil level touch to low?

You should be doing regular top ups...

Anyway as J'z-R33 has said, do an oil change.

I asume you got a RB20DET... It is an older engine, I would suggest a thicker oil then the Full Synthetics.

I would say Semi Synthetic. I am using Mobil Synthetic S (Semi Synthetic) 10W-40 as recommended by my mechanic after my turbo rebuilds.

Its about $35 - $40 for 5 litres at Auto Barn / Supercheap Autos.

Also change your oil filter at the same time with the engine oil.

If you really want, take it to your mechanic and ask to see if they can do a light engine flush, that just cleans it up a bit and gets rid of any shit inside the engine, then do the oil change.

yea, low isn't a good sign. you shouldn't let it get past halfway. you should do an oil change every 5000k's too. which means, letting the old oil out and putting new oil in. it's very simple, you should have someone teach you.

seeing as it is on low at the moment, you're probably best to top it up(correct me if im wrong) .specially if you can't get it changed asap, as you don't want to drive around on low, it could do big damage. you should check your oil level weekly.

How did you let the engine oil level touch to low?

You should be doing regular top ups...

Anyway as J'z-R33 has said, do an oil change.

I asume you got a RB20DET... It is an older engine, I would suggest a thicker oil then the Full Synthetics.

I would say Semi Synthetic. I am using Mobil Synthetic S (Semi Synthetic) 10W-40 as recommended by my mechanic after my turbo rebuilds.

Its about $35 - $40 for 5 litres at Auto Barn / Supercheap Autos.

Also change your oil filter at the same time with the engine oil.

If you really want, take it to your mechanic and ask to see if they can do a light engine flush, that just cleans it up a bit and gets rid of any shit inside the engine, then do the oil change.

mineral, semi synthetic or synthetic has nothing to do with 'thickness' of oil. that only really affects the quality. the grade determines the thickness. a 10w40 synthetic is just as 'thick' as a 10w40 mineral.

buy the best oil you can afford. stuff like the semi-synth mobil is rubbish. i'd use it only if you can't afford anything better. at the top end of the scale you have the ester base oil like motul chrono which is $$$. 1 step down you have full synthetic like royal purple, and then go into stuff like castrol edge which is marketed as fully synthetic but is not really.

I would also reccomend just dropping this oil and replacing oil and filter for new stuff.

Just bought the car recently , is it bad to have your oil touching Low ..?

yer ive asked my mate to help me on this but they are slackers.

what about Penrite 10w50 ive been told from my previous owner.

or should i get Mobil Syntheic S?

Yeah man!

Cuz your car is turbo, you will burn off a bit of oil as it is normal. So I can suggest you check your oil every 2-3 weeks, thats my opinion anyway.

Couldn't tell you anything about Penrite 10W 50, as I have only used Martini Racing oil 10W 40 (Awesome but bit too thin and burns off quickly) Better use for newer engines.

Shell Helex 15W 50 (Used it but would not recommend it)

Valvoline 20W 50 (Wanted to try a thicker oil so it would not burn off so quickly, this was too thick and car ran sluggish)

Mobil 10W 40 atm and it runs smooth. Even when the oil starts to thicken abit, the car still feels good.

yea, low isn't a good sign. you shouldn't let it get past halfway. you should do an oil change every 5000k's too. which means, letting the old oil out and putting new oil in. it's very simple, you should have someone teach you.

seeing as it is on low at the moment, you're probably best to top it up(correct me if im wrong) .specially if you can't get it changed asap, as you don't want to drive around on low, it could do big damage. you should check your oil level weekly.

+1

As burkill has said, if you don't have a chance of changing the oil just yet, top it up to full, just give it a bit more oil, so above the "H" Line but not too much.

fair enough im ready to get some oil today and to pit up. can anyone tell me if its ok to put Penrite HPR10 10w50 which is what the previous owner told me?

does autobarn, repco sells them?

Yes Auto Barn , Repco, Supercheap Autos sell them. My susggestion is Mobil or Motul.

Penrite 10W 50 should be fine but but see if its a Full or Semi Synthetic... Iam sticking with Mobil. It all comes down to personal prefferance and your own experiance.

BUT I can say you will not go wrong with Mobil as my mechanic recmommended.

Again whatever you do, just top it up to full ASAP.

Cool!

mineral, semi synthetic or synthetic has nothing to do with 'thickness' of oil. that only really affects the quality. the grade determines the thickness. a 10w40 synthetic is just as 'thick' as a 10w40 mineral.

buy the best oil you can afford. stuff like the semi-synth mobil is rubbish. i'd use it only if you can't afford anything better. at the top end of the scale you have the ester base oil like motul chrono which is $$$. 1 step down you have full synthetic like royal purple, and then go into stuff like castrol edge which is marketed as fully synthetic but is not really.

I would also reccomend just dropping this oil and replacing oil and filter for new stuff.

How can you say its rubbish?

going to get the penrite 10w50 ( a Full or Semi Synthetic? no idea) for now to top it up

is 1 liter enough?

and am goin g to get the motul 10w40 for my next service

sounds good?

Just get the Semi for now as its just for your top up unitl you do your next oil change.

Get a litre and see how you go, if its not enough just buy another 1lt bottle.

just put a little in at a time.

poor for a 1 or 2 seconds, let it sit. on the the first poor, poor it in for about 3-5 seconds.

check after 10 minutes, then poor a little bit more.

repeat till at the right level. just add a little more, so you don't overfill it.

what is the name of the Motul one that everyone seems to give good view on?

Motul Chrono. Owners of Italian Stallions, Crowns and Bulls often use it. Just Jap mechanics use it

ELF Excellium SM 10W-50 or 5W-40 is really good on Skylines. Powerplay Imports use it.

MOBIL 1 and ROYAL PURPLE also have a top reputation for our cars.

Don't underestimate the fact that a high quality oil, changed every 5000Kms and kept up to the top mark, is an investment on your engine's longevity!

Happy Motoring! Tez

PS As far as lubricants go, I tend to stay away from Magnatec & KY Jelly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...