Jump to content
SAU Community

Recommended Posts

Hi all,

Up for sale is a complete Alcon Greddy brake kit, 6-pot calipers front and 4-pot rears, 355mm slotted rotors all round. Bought used, never fitted, NEVER TRACKED as far as I am aware. Kit comes complete with lines, and pads are still alright for street use(can organize pads at your expense) Can ship interstate at buyer's expense. Selling because of change in plans.

Asking what I paid for them, AUD$4200

DSC01947.jpg

DSC01949.jpg

Please contact me at: [email protected] or SMS at 0405-515-039

Nice kit mate, if you line up a buyer whos just interested in the calipers im keen on just the rotors.. i know its a long shot but worth a try.

Cheers

J

Hi all,

Up for sale is a complete Alcon Greddy brake kit, 6-pot calipers front and 4-pot rears, 355mm slotted rotors all round. Bought used, never fitted, NEVER TRACKED as far as I am aware. Kit comes complete with lines, and pads are still alright for street use(can organize pads at your expense) Can ship interstate at buyer's expense. Selling because of change in plans.

Asking what I paid for them, AUD$4200

Please contact me at: [email protected] or SMS at 0405-515-039

Hi Gents,

I need to apologize to all for an error that I made with the original add here, just measured up the rotors again and they are 330mm and NOT 355's(many thanks to Simon for catching that!) Will post up rotor thicknesses within the hour. Again, sincere apologies for the error on my part.

Edited by Sylent Whyte
i have already let a mate of my know about these.... he should be in contact with u soon!~ Good luck!

Thanks so much for that Royal! God knows, I need all the help I can get. Getting more pov as the days go by.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...