Jump to content
SAU Community

Recommended Posts

hi all

my stock turbo on my r33 shit itself and its time to go better just wondering what would be best for a stock motor on the in side im doing hi mount, custom intake, fmic, ecu, injectors and pump if needed.

would a gt35/40r .82 rear be to big

some ideas and info would be great thanks

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

The HKS GTRS has always had good results.

The A'PEXi AX53B70 is another one, its basically the equivelant to the GTRS

Both are good for the 250 to 260kw range.

You could also highflow your standard turbo and expect around 230 - 240kw

These will all bolt onto the standard manifold and won't give you lag and then a massive wave of power like the GT35R will on a 25.

Edited by MintR33
hi all

my stock turbo on my r33 shit itself and its time to go better just wondering what would be best for a stock motor on the in side im doing hi mount, custom intake, fmic, ecu, injectors and pump if needed.

would a gt35/40r .82 rear be to big

some ideas and info would be great thanks

no need to go high mount bud, waste of time and money on an internally stock motor. and a 35/40 may very well be the worst turbo choice you could make on an internally stock engine. as has been said already, a gtrs bolt on kit would be prime, if your after a bit more poke go a 3037. if your workin to a budget, get a highflow stock turbo

Buy my KKR430! I need it gone!

Check my link out http://www.skylinesaustralia.com/forums/Br...l&hl=kkr430

what brand is it mate.

a mate has got a new t04e for sale what kw would u see with that

I'd recommend the HKS GT2530 for a good balance between power and response - just not the price!

The HKS GT2530 Kai Bolt-up Kit for the R33 cost me about $3.5K to import in the last month or so - not a cheap option but works for me and exactly what I needed :-)

no need to go high mount bud, waste of time and money on an internally stock motor. and a 35/40 may very well be the worst turbo choice you could make on an internally stock engine. as has been said already, a gtrs bolt on kit would be prime, if your after a bit more poke go a 3037. if your workin to a budget, get a highflow stock turbo

why do u say no need for a hi mount

I run the HKS 2535 and puts out some good power!!!!

You also have to remember that you can only boost so much on a stock engine anyway so there's not much point pushing anything past 14 - 15psi. That'll get you around the 230 - 240rwkw mark!!!!! Then fuel becomes and issue. U'll need bigger injectors.

highmount is a waste of time...

1 - cop magnet

2 - on an internally stock engine your not going to be putting out numbers that make the standard manifold a real restriction

3 - cop magnet

4 - expensive for virtually no gains

i'm running an hks 2835 pro s - expect 260-280 rwkw's depending on motor/mods/tune with near stock response.

you will need ecu, injectors, afm, fuel pump, fmic and clutch minimum

highmount is a waste of time...

1 - cop magnet

2 - on an internally stock engine your not going to be putting out numbers that make the standard manifold a real restriction

3 - cop magnet

4 - expensive for virtually no gains

i'm running an hks 2835 pro s - expect 260-280 rwkw's depending on motor/mods/tune with near stock response.

you will need ecu, injectors, afm, fuel pump, fmic and clutch minimum

i got one sitting around i got cheap awhile ago so thats why i was gonna put it on

whats the hks 2835 pro s worth and whats the specs

I run the HKS 2535 and puts out some good power!!!!

You also have to remember that you can only boost so much on a stock engine anyway so there's not much point pushing anything past 14 - 15psi. That'll get you around the 230 - 240rwkw mark!!!!! Then fuel becomes and issue. U'll need bigger injectors.

what would u pay for a hks 2535 turbo custom dump and front pipe and all oil and water lines made to suit a r33 second hand min shaft play. what would one cost for a rebuild any way mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...