Jump to content
SAU Community

Recommended Posts

A bloke told me that there is a different level of complaince if you import a car yourself to if an importer imports one and that i wouldn't be able to register a car thats been imported privatly?

or once its complied thats it? the car im talking about is already registered in a different state

sorry if i missed this in the search

Link to comment
https://www.sau.com.au/forums/topic/249153-different-levels-of-compliance/
Share on other sites

the Bloke must have been talking about a persoanl import these cars are owned by someone more than 12months overseas and are allowed in under the personal import Scheme not RAWS so the only go thru an Engineers certification and mod plated to be allowed to register this differs for all states . this would mean if you moved interstate it may need to be rechecked and signed off by an engineer from that state.

In the Case your question is asking if you are a private person importing or a dealer imports a vehicle unders the Raws system they are all complied axactly to a national standard set by raws and would be able to register in any state.

So really you need to find out if the car was a personal import or a Raws complied car. for your own information Personal imports have a yellow type Id plaque stating the vin and personal import. for old Raws complied cars they are green ID plate and in the last time raws went crazy they changed it to purple colour with all details of raws compliance workshops name and Vin # etc ..

ask the seller for a photo of the import plate it should clearly state what type of import it is.

Hope this helps

Regards, Phil

Ahh that makes sense now thanks mate! im pretty sure he didn't own it for 12 months over there he just imported it, i'll get a photo of the import plate but i can see a purple plate in the engine bay pic i have, can't read any numbers though

thanks for your help

edit so it doesnt matter what the numbers are on the purple plate as long as its purple? see attached link for pic

http://img246.imageshack.us/img246/9347/dscengineax1.jpg

Edited by byebye

to be honest I would ring the relevant office in your state and state your case.

I own a personal import that I bought from interstate and for me (qld) it was a case of going to QT and registering it.

You don't need SEVS compliance, that personal import compliance plate is a federal scheme, so it's already qualified to be in the country.

Here in VIC, you'd need an engineer's certificate, I think NSW is the same. SA you just take it to regency I believe.

Anyways, like Chris said, check with your local state road agency to find out what you need to register a personal import (yellow plate).

cheers,

David @ Carizma

So i would have to get it complied to change states
  • 1 month later...

In relation to imports, I had a look at this site:

http://www.tradecarview.com/used_car/japan...?ps=25&so=2,

It provides a shipping estimator and Freight courier. I looked at the Skylines, Wrx and Evo's which are resonably priced.

I have no experience in this field and would like to know how much hoops do i have to jump to get this vehicle on the road in NSW ie RTA. Would i need engineers certificates or what ever cerificates ??????.

Some nice Imports in Japan, what are your thoughts.

Do a search on tradecarview and you'll find out what the general consensus is >_<

Aside from just being a place were dealers list their cars it is also were lazy arse people cut and paste images from and state it is some ones stock that supplies to them but half the time it is just some cheap piece of shit sitting in a dealers yard somewhere in Japan.

what are the requirements for xenon headlights and front windscreen replacement in regards to compliance?

i looked at a car from a backyard dealer who couldn't speak English very well and i'm sure he said that he doesn't bother removing the xenons or replacing the windscreen (although he said he was meant to) for compliance.

any help appreciated.

The headlights are supposed to be modified to accept H1 globes.

Windshield is usual part no. M1G4 for the 34 coupes, there could be others that pass the ADR as well, haven't seen the evidence recently.

Both headlights and windscreen have to be roadworthy as well of course, which is where you're more likely to run into problems rather than with the compliance of them.

David @ Carizma

what are the requirements for xenon headlights and front windscreen replacement in regards to compliance?

i looked at a car from a backyard dealer who couldn't speak English very well and i'm sure he said that he doesn't bother removing the xenons or replacing the windscreen (although he said he was meant to) for compliance.

any help appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...