Jump to content
SAU Community

Recommended Posts

but thats the bit i dont get?? it pours fuel out the back like it's got a free fuel card...

just because its running rich doesnt mean its got enough fuel for the air you provide the engine at those boost levels

at 18psi on a gtr with a stock fuel system, something clearly over its capasity where it be injectors or fuel pump

put the boost to 15psi or somewhere it doesnt ping and take it to a dyno place to see whats going on

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321611
Share on other sites

just because its running rich doesnt mean its got enough fuel for the air you provide the engine at those boost levels

at 18psi on a gtr with a stock fuel system, something clearly over its capasity where it be injectors or fuel pump

put the boost to 15psi or somewhere it doesnt ping and take it to a dyno place to see whats going on

ahhh, ok cool, yeah i got a shitty boost controller, so it tends to spike a bit, kinda gotta watch it myself

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321624
Share on other sites

oh btw what max's out first injectors or pump, injectors been replaced b4 i got the car, not sure if bigger tho, but you'd think if they were in their right mind they would have yeah?? unless cash was an issue...

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321628
Share on other sites

yeah coz of the dust ay?? its not running 18, just every now and than it spikes, i run it at 10 psi now days just to be sure, that way it only spikes to 15 pound, haha

yeah need to take it to a dyno or hoist to see wtf is going on

oh and is there any way a boost controller could be making to turbo's lag??? like not hitting 15 psi till 4.5-5k or so?? thats pretty late for stock turbo's isnt it?

yes i know, my car is doing some f**ked up shit!!

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321846
Share on other sites

start saving your money. If you continue to disrespect your rb26 like this your going to need a rebuild.

says the bloke who's pic is of him doing a burnout... haha

i dont run the thing on 18psi, im just saying there is something wrong with my boost controller and its starting to let it spike, thats why i've turned it back to 10 pound so if it does happen to spike, it's still safe.

going to look at it over chrissy break and watch my boost gage like a hawk in between.

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4322546
Share on other sites

the difference between his and yours, is that his is already a forged motor and it has been tuned to suit all the modifications made to it.

yeah thats why im only running 10 pound atm.

so im looking for nismo fuel pump and till then just gonna drive it around on low boost, then look at getting bigger turbo's!! and see if i can blow my engine...

and i've seen plenty of 'built' engines blow from doing burnouts. but that ussually the drivers, to me thats showing real disrespect to your car... but each to there own, im sure there worse things, like running your car lean, haha

Edited by Dearlove
Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4323049
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...