Jump to content
SAU Community

Recommended Posts

but thats the bit i dont get?? it pours fuel out the back like it's got a free fuel card...

just because its running rich doesnt mean its got enough fuel for the air you provide the engine at those boost levels

at 18psi on a gtr with a stock fuel system, something clearly over its capasity where it be injectors or fuel pump

put the boost to 15psi or somewhere it doesnt ping and take it to a dyno place to see whats going on

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321611
Share on other sites

just because its running rich doesnt mean its got enough fuel for the air you provide the engine at those boost levels

at 18psi on a gtr with a stock fuel system, something clearly over its capasity where it be injectors or fuel pump

put the boost to 15psi or somewhere it doesnt ping and take it to a dyno place to see whats going on

ahhh, ok cool, yeah i got a shitty boost controller, so it tends to spike a bit, kinda gotta watch it myself

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321624
Share on other sites

oh btw what max's out first injectors or pump, injectors been replaced b4 i got the car, not sure if bigger tho, but you'd think if they were in their right mind they would have yeah?? unless cash was an issue...

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321628
Share on other sites

yeah coz of the dust ay?? its not running 18, just every now and than it spikes, i run it at 10 psi now days just to be sure, that way it only spikes to 15 pound, haha

yeah need to take it to a dyno or hoist to see wtf is going on

oh and is there any way a boost controller could be making to turbo's lag??? like not hitting 15 psi till 4.5-5k or so?? thats pretty late for stock turbo's isnt it?

yes i know, my car is doing some f**ked up shit!!

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4321846
Share on other sites

start saving your money. If you continue to disrespect your rb26 like this your going to need a rebuild.

says the bloke who's pic is of him doing a burnout... haha

i dont run the thing on 18psi, im just saying there is something wrong with my boost controller and its starting to let it spike, thats why i've turned it back to 10 pound so if it does happen to spike, it's still safe.

going to look at it over chrissy break and watch my boost gage like a hawk in between.

Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4322546
Share on other sites

the difference between his and yours, is that his is already a forged motor and it has been tuned to suit all the modifications made to it.

yeah thats why im only running 10 pound atm.

so im looking for nismo fuel pump and till then just gonna drive it around on low boost, then look at getting bigger turbo's!! and see if i can blow my engine...

and i've seen plenty of 'built' engines blow from doing burnouts. but that ussually the drivers, to me thats showing real disrespect to your car... but each to there own, im sure there worse things, like running your car lean, haha

Edited by Dearlove
Link to comment
https://www.sau.com.au/forums/topic/249164-gtr-detonating/#findComment-4323049
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...