Jump to content
SAU Community

Recommended Posts

Ok - it seem these are RE-11S (as opposed to just Re-11). Released 1/12/08 so maybe a bit early to tell how good they are but seem to be aimed at the autocross guys as they seem a bit softer than RE55's from the had to read charts! LOL

20081114-bridgestone1.jpg

20081114-bridgestone2.jpg

quite a few guys in japan tell me the a050s are the shit. but then again a few of them liked the a048s too which didn't enjoy much success here.

i only know one guy who's even used the RE-11S and he was pretty impressed. but yeah a bit early to tell yet. not enough folk using them. and often what seems to work OS doesn't always work in aus.

  • 2 weeks later...

Duncan, Khumo whats? For track application? Be interested to hear.

hmm shame I'd have to talk to gordon leven about either of them in nsw.

we've finally moved off the yokos on the khumos. 40% cheaper and about 50% better lol.

tyre noise is generally right at the bottom of the list of concerns for a track tyre. generally you want grip, consistency, feel, tyre life, and cost. noise doesn't really rate. :cheers:

hmm shame I'd have to talk to gordon leven about either of them in nsw.

we've finally moved off the yokos on the khumos. 40% cheaper and about 50% better lol.

Also would love to know which khumo's as my re55 have reached the end of their life and would love a cheaper alternative...

Yeah we found the same thing. We found the little tyres that suited the EVO's / WRX's were cheap as but the bigger sizes needed for skylines were more expensive than the Bridgestones.

I went down and chatted to Bridgestone today as well about these new RE-11S tyres. They'd never heard of them (they had to google them!) and pretty much said not to expect any here for at least another 12 months.

Yeah we found the same thing. We found the little tyres that suited the EVO's / WRX's were cheap as but the bigger sizes needed for skylines were more expensive than the Bridgestones.

I went down and chatted to Bridgestone today as well about these new RE-11S tyres. They'd never heard of them (they had to google them!) and pretty much said not to expect any here for at least another 12 months.

not bloody surprising... by the time we get some they will be superseeded.... just like we still don't have a nissan R35 and they are already up to mk 2 and Spec V.... being in a small economy sure does suck.. :(

Don't know how much of a rush I'd be to getting them anyways. I got some priced from a supplier in Japan and at 43,000yen per tyre for 265/35/18's plus delivery you are looking at a pretty serious bill by the time they arrive here!

That makes DZ03's look reasonable in price. In fact the price of R comps over the next year or 2 could become quite scary I think.

  • 3 weeks later...

sorry I should have been clearer. Production Car (and Improved production for that matter) have a control tyre, for the last few years that has been Yoko A048R (and A032R before that). $500 per corner for 245/45/17 and the only place you can buy them in NSW is Gordon Leven (Gordon is kind enough to refund $5 from each tyre back to the street sedan race club).

From this year Kumho have won the tender and we are now running v70a/v700. They are about 30% cheaper and will perform better.

In particular the A048r would be about 1 sec quicker on laps 2-4 then they just go downhill, so if you can afford $2k in new tyres each time you go out you can set some good times on them.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...