Jump to content
SAU Community

Recommended Posts

Ok - it seem these are RE-11S (as opposed to just Re-11). Released 1/12/08 so maybe a bit early to tell how good they are but seem to be aimed at the autocross guys as they seem a bit softer than RE55's from the had to read charts! LOL

20081114-bridgestone1.jpg

20081114-bridgestone2.jpg

quite a few guys in japan tell me the a050s are the shit. but then again a few of them liked the a048s too which didn't enjoy much success here.

i only know one guy who's even used the RE-11S and he was pretty impressed. but yeah a bit early to tell yet. not enough folk using them. and often what seems to work OS doesn't always work in aus.

  • 2 weeks later...

Duncan, Khumo whats? For track application? Be interested to hear.

hmm shame I'd have to talk to gordon leven about either of them in nsw.

we've finally moved off the yokos on the khumos. 40% cheaper and about 50% better lol.

tyre noise is generally right at the bottom of the list of concerns for a track tyre. generally you want grip, consistency, feel, tyre life, and cost. noise doesn't really rate. :cheers:

hmm shame I'd have to talk to gordon leven about either of them in nsw.

we've finally moved off the yokos on the khumos. 40% cheaper and about 50% better lol.

Also would love to know which khumo's as my re55 have reached the end of their life and would love a cheaper alternative...

Yeah we found the same thing. We found the little tyres that suited the EVO's / WRX's were cheap as but the bigger sizes needed for skylines were more expensive than the Bridgestones.

I went down and chatted to Bridgestone today as well about these new RE-11S tyres. They'd never heard of them (they had to google them!) and pretty much said not to expect any here for at least another 12 months.

Yeah we found the same thing. We found the little tyres that suited the EVO's / WRX's were cheap as but the bigger sizes needed for skylines were more expensive than the Bridgestones.

I went down and chatted to Bridgestone today as well about these new RE-11S tyres. They'd never heard of them (they had to google them!) and pretty much said not to expect any here for at least another 12 months.

not bloody surprising... by the time we get some they will be superseeded.... just like we still don't have a nissan R35 and they are already up to mk 2 and Spec V.... being in a small economy sure does suck.. :(

Don't know how much of a rush I'd be to getting them anyways. I got some priced from a supplier in Japan and at 43,000yen per tyre for 265/35/18's plus delivery you are looking at a pretty serious bill by the time they arrive here!

That makes DZ03's look reasonable in price. In fact the price of R comps over the next year or 2 could become quite scary I think.

  • 3 weeks later...

sorry I should have been clearer. Production Car (and Improved production for that matter) have a control tyre, for the last few years that has been Yoko A048R (and A032R before that). $500 per corner for 245/45/17 and the only place you can buy them in NSW is Gordon Leven (Gordon is kind enough to refund $5 from each tyre back to the street sedan race club).

From this year Kumho have won the tender and we are now running v70a/v700. They are about 30% cheaper and will perform better.

In particular the A048r would be about 1 sec quicker on laps 2-4 then they just go downhill, so if you can afford $2k in new tyres each time you go out you can set some good times on them.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...