Jump to content
SAU Community

Recommended Posts

It works quite well apparently. Yet to try it on my R33 though, next on the list.. My lights aint heaps bad though just a about half the RHS light.

I found the best for my headlights has been to use one of these kits first off, and get the lights very clear. Then once every few months they will get a bit dull again, just go over them with some cut and polish and bam good as new.

  • 5 months later...
  • 1 year later...
  • 1 month later...
  • 4 weeks later...

I just applied some cut&polish to my very smokey yellow headlights yesterday. Made sure I rubbed it in nicely, then moved over to the other headlight, waited 5-10 minutes for it to dry up in the sun and removed it. Lights came out glimmering!

Will post pics!

  • 3 weeks later...

I still stand by the PlasticX or whatever its called. Had another crack at mine on saturday, but did it with an electric buff instead. Saved me lots of time and energy and turned out pretty decent.

My lights arent in tip top shape, they have a bit of crazy cracking going on. hard to tell if its the inside or out. But once they have been polished up you dont notice it too much.

Hoping its obvious that the drivers side is done and not the passengers :P And try to ignore the passengers indicator. LOL. It fell out under brakes and i run the bugger over. Was all that was left of it! Dam LED Repco light replacement.

20120226_155744.jpg

Edited by gotRICE?
  • 3 weeks later...
  • 5 months later...

I use Brasso and a few rags and that seems to bring them up like new again. What i do is wash them and wait for them to dry then apply the Brasso and leave for a few minutes then with a clean rag give them a firm wipe off!

I use plastx myself and I think there are a number of solutions that will get rid of the yellow. However, I am more interested in a good sealant to make it last.

So far a coat of clear has yielded the best results and lasted a good few months - is there a longer term solution?

I am more interested in a good sealant to make it last.

This.

The Turtle Wax Kit I used above, looked the goods for a while, but I'm back to yellow.

The UV sealant provided in the kit is obviously of teh gaids.

  • 3 weeks later...

My problem is its from the inside were all the damge is not on the outside,i used plastx there already clean headlights they are xenon S3 although it looks like the problem might be from the inside of the headlights unfortunately..

  • 3 months later...

Reviews look promising. Possible group buy?

would be interested.

i used glassylite about 1 week ago, can post up pics here when im home tonight if anyone wants them. will report back in a few months to see what the progress is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...