Jump to content
SAU Community

Recommended Posts

Hey guys,

I have owned the GTR for about 2 years now and have blow 2 lots of turbos in that time. Being a poor bastard and liking the stock power I replaced them with stock ones again. That was all fine and dandy makeing about 0.9 Bar boost all day every day. The car is completly stock engine wise. Basic support mods include HKS Intercooler, HKS Exhuast and HKS BOV. Stock ECU, Injectors ect

Now heres my problem. I have been using it as my dayly driver for abit now giving it a fairly easy life putting around in traffic. Now all of a sudden it doesn't like to boost pass 0.6 bar and blows a f**k load of smoke out the back. Missfires and doesn't go very fast. The car still revs to 7.5k, idles fine, builds boost quickly as well. Smokey ilde sometimes.

I have checked the following -

  1. Blocked BOV - Didnt notice and different
  2. Checked all pipping - intercooler hoses and fuel lines - all ok here
  3. Reset ECU - no change
  4. Checked for shity fuel with water in it. Flushed tank - still the same

Going to do a compression test this weekend will report back with what i find, the problem is i have done alot of research and it points to a leaking intercooler pipe. Checked all the piping a million times now and still nothing comes up.

I also can't take it to a machinic because i live in a small rural town full of FORDs and Holdens and the mechs scratch there heads with my car. My last resort will be chucking it in the back or a trailer and taking it to HyperDrive MS.

Cheers, :P

Link to comment
https://www.sau.com.au/forums/topic/249980-r32-gtr-with-black-smokemiss-fire/
Share on other sites

black smoke is excess fuel

checked AFM's? Mine started to occasional stall whilst on light load. needed cleaning and now all good, better + better throttle response.

Checked plugs / gaps / leads ?? with increased boost the spark can be 'blown' out with a large gap/stuffed plug as boost increases

yeh can imagine very few nissan turbos floating round in gero :P

Yep only r32 GTR in town. Makes it hard sometimes....

New spark plaugs were graped to .08? or .8? one of the two. AFM are a bitch to get to will check tomorrow.

Could it be a piston that is stuffed?

Thanks for the hints.

Dont know the gaps of the top of my head, never replaced/regapped mine, do a search

the problem doesnt sound mechanical as you said the car idles fine/normal & builds boost as per normal.

am thinking a boost leak but you've said you already checked all hoses. could be a stuck open bov.

you've dropped 0.3 bar all of a sudden and theres misfiring, spluttering so am thikning theres still 0.9bar worth of fuel going in

Edited by Mike__
Dont know the gaps of the top of my head, never replaced/regapped mine, do a search

the problem doesnt sound mechanical as you said the car idles fine/normal & builds boost as per normal.

am thinking a boost leak but you've said you already checked all hoses. could be a stuck open bov.

you've dropped 0.3 bar all of a sudden and theres misfiring, spluttering so am thikning theres still 0.9bar worth of fuel going in

Just for a update the car is struggling to idle now, blowing black smoke on idle. Car still revs fine but with alot of miss fire.

Compression test will tell whats wrong.

hey white boy, your not the bloke with the blue gtr that i raced a few months back in my white one??

Yer man... had a few goodies since then. Now she is stuffed, hardly idles and blows white and blue smoke now...

Yer man... had a few goodies since then. Now she is stuffed, hardly idles and blows white and blue smoke now...

definently comp test it.

white smoke is unburnt fuel and blue is oil smoke.

almost sounds like a hole in a piston..

Just to correct that,

White smoke is coolant

Black is Petrol

Blue is oil

what ever mate.

EXCESS fuel is black smoke.

UNBURNT fuel from not unuf compression or no spark is white smoke.

water smoke is steam not smoke.

what ever mate.

EXCESS fuel is black smoke.

UNBURNT fuel from not unuf compression or no spark is white smoke.

water smoke is steam not smoke.

So now compression test is next....

If it is a piston that is stuffed is it possible to do a RB30 NA swap over? Any good guids out? I have found the PDF but it skipped alot of things like ECU ect....

[if it is a piston that is stuffed is it possible to do a RB30 NA swap over? Any good guids out? I have found the PDF but it skipped alot of things like ECU ect....

im thinking of doing an rb30 conversion as well, we'll have to have another drag after, lol

[if it is a piston that is stuffed is it possible to do a RB30 NA swap over? Any good guids out? I have found the PDF but it skipped alot of things like ECU ect....

im thinking of doing an rb30 conversion as well, we'll have to have another drag after, lol

compression test done

  • 1st 140
  • 2nd 140
  • 3rd 150
  • 4th 150
  • 5th 130
  • 6th 130

All rough figures being noob at it doesn't help. Give or take 5PSI. So what does this mean? Everything ok? I'm leaning towards the turbos now. Is there any way to check?

Do a diagnostic search, could easily be an AFM or cas or igniter.

Ok how do i check the AFM? I have unpluged them and notice both times the car nearly stalling but car ran the same. Do i need to clean them? If so what with? I have the stock air box and just a panel filter.

CAS? Crank angle sensor? is that on the front of the engine? Unpluged that and the car didn't start. Pluged it back in and the car was the same.

Fuel. Don't know how i'm spose to check the fuel pressure. I will ask my mech mate tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...