Jump to content
SAU Community

R32 Gtr With Black Smoke/miss Fire

whiteboy01

By whiteboy01,
in Engines & Forced Induction

 Share

Recommended Posts

whiteboy01 Collaborator

whiteboy01

Posted
Posted

Hey guys,

I have owned the GTR for about 2 years now and have blow 2 lots of turbos in that time. Being a poor bastard and liking the stock power I replaced them with stock ones again. That was all fine and dandy makeing about 0.9 Bar boost all day every day. The car is completly stock engine wise. Basic support mods include HKS Intercooler, HKS Exhuast and HKS BOV. Stock ECU, Injectors ect

Now heres my problem. I have been using it as my dayly driver for abit now giving it a fairly easy life putting around in traffic. Now all of a sudden it doesn't like to boost pass 0.6 bar and blows a f**k load of smoke out the back. Missfires and doesn't go very fast. The car still revs to 7.5k, idles fine, builds boost quickly as well. Smokey ilde sometimes.

I have checked the following -

  1. Blocked BOV - Didnt notice and different
  2. Checked all pipping - intercooler hoses and fuel lines - all ok here
  3. Reset ECU - no change
  4. Checked for shity fuel with water in it. Flushed tank - still the same

Going to do a compression test this weekend will report back with what i find, the problem is i have done alot of research and it points to a leaking intercooler pipe. Checked all the piping a million times now and still nothing comes up.

I also can't take it to a machinic because i live in a small rural town full of FORDs and Holdens and the mechs scratch there heads with my car. My last resort will be chucking it in the back or a trailer and taking it to HyperDrive MS.

Cheers, :P

Link to comment
https://www.sau.com.au/forums/topic/249980-r32-gtr-with-black-smokemiss-fire/
Share on other sites
Mike__ Enthusiast

Mike__

Posted
Posted

black smoke is excess fuel

checked AFM's? Mine started to occasional stall whilst on light load. needed cleaning and now all good, better + better throttle response.

Checked plugs / gaps / leads ?? with increased boost the spark can be 'blown' out with a large gap/stuffed plug as boost increases

yeh can imagine very few nissan turbos floating round in gero :P

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted

Yep only r32 GTR in town. Makes it hard sometimes....

New spark plaugs were graped to .08? or .8? one of the two. AFM are a bitch to get to will check tomorrow.

Could it be a piston that is stuffed?

Thanks for the hints.

Mike__ Enthusiast

Mike__

Posted
Posted (edited)

Dont know the gaps of the top of my head, never replaced/regapped mine, do a search

the problem doesnt sound mechanical as you said the car idles fine/normal & builds boost as per normal.

am thinking a boost leak but you've said you already checked all hoses. could be a stuck open bov.

you've dropped 0.3 bar all of a sudden and theres misfiring, spluttering so am thikning theres still 0.9bar worth of fuel going in

Edited by Mike__
whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted
Dont know the gaps of the top of my head, never replaced/regapped mine, do a search

the problem doesnt sound mechanical as you said the car idles fine/normal & builds boost as per normal.

am thinking a boost leak but you've said you already checked all hoses. could be a stuck open bov.

you've dropped 0.3 bar all of a sudden and theres misfiring, spluttering so am thikning theres still 0.9bar worth of fuel going in

Just for a update the car is struggling to idle now, blowing black smoke on idle. Car still revs fine but with alot of miss fire.

Compression test will tell whats wrong.

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted
hey white boy, your not the bloke with the blue gtr that i raced a few months back in my white one??

Yer man... had a few goodies since then. Now she is stuffed, hardly idles and blows white and blue smoke now...

Jet 20 Enthusiast

Jet 20

Posted
Posted
Yer man... had a few goodies since then. Now she is stuffed, hardly idles and blows white and blue smoke now...

definently comp test it.

white smoke is unburnt fuel and blue is oil smoke.

almost sounds like a hole in a piston..

Jet 20 Enthusiast

Jet 20

Posted
Posted
Just to correct that,

White smoke is coolant

Black is Petrol

Blue is oil

what ever mate.

EXCESS fuel is black smoke.

UNBURNT fuel from not unuf compression or no spark is white smoke.

water smoke is steam not smoke.

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted
what ever mate.

EXCESS fuel is black smoke.

UNBURNT fuel from not unuf compression or no spark is white smoke.

water smoke is steam not smoke.

So now compression test is next....

If it is a piston that is stuffed is it possible to do a RB30 NA swap over? Any good guids out? I have found the PDF but it skipped alot of things like ECU ect....

Dearlove Collaborator

Dearlove

Posted
Posted

[if it is a piston that is stuffed is it possible to do a RB30 NA swap over? Any good guids out? I have found the PDF but it skipped alot of things like ECU ect....

im thinking of doing an rb30 conversion as well, we'll have to have another drag after, lol

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted
[if it is a piston that is stuffed is it possible to do a RB30 NA swap over? Any good guids out? I have found the PDF but it skipped alot of things like ECU ect....

im thinking of doing an rb30 conversion as well, we'll have to have another drag after, lol

compression test done

  • 1st 140
  • 2nd 140
  • 3rd 150
  • 4th 150
  • 5th 130
  • 6th 130

All rough figures being noob at it doesn't help. Give or take 5PSI. So what does this mean? Everything ok? I'm leaning towards the turbos now. Is there any way to check?

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted
Do a diagnostic search, could easily be an AFM or cas or igniter.

Ok how do i check the AFM? I have unpluged them and notice both times the car nearly stalling but car ran the same. Do i need to clean them? If so what with? I have the stock air box and just a panel filter.

CAS? Crank angle sensor? is that on the front of the engine? Unpluged that and the car didn't start. Pluged it back in and the car was the same.

Fuel. Don't know how i'm spose to check the fuel pressure. I will ask my mech mate tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...