Jump to content
SAU Community

Recommended Posts

Hey guys,

Looking threw the forums, a lot of questions have been raised about what brands to get and NOT to get.

Please post here on what brands you've had problems with and you suggest not to buy. Also what brands that you've haven't have problems with - this includeds fmic, turbos and any other items you wish to bring up.

So pretty mich general discussion on what good and bad quality brands. :P

Cheers

Link to comment
https://www.sau.com.au/forums/topic/251603-fmic-turbos-and-more/
Share on other sites

intercoolers

- goto your local performance shop who works on skylines and get them to fit & supply a generic intercooler ballpark $550 fitted

- or you can go the jap brand kits, but they are much more expensive $1000 unfitted

turbos

- garrett, hks, apexi, trust, greddy, ihi, blitz, turbonetics

- avoid KKR, SuperT70, MonsterT70, Monster Power, Master Power, Monsta, T4, T3/T4s on ebay, "truck items"

intercoolers

- goto your local performance shop who works on skylines and get them to fit & supply a generic intercooler ballpark $550 fitted

- or you can go the jap brand kits, but they are much more expensive $1000 unfitted

turbos

- garrett, hks, apexi, trust, greddy, ihi, blitz, turbonetics

- avoid KKR, SuperT70, MonsterT70, Monster Power, Master Power, Monsta, T4, T3/T4s on ebay, "truck items"

What about cooling pro, CX racing for fmic?

Have you any bad exp with any of those brands or you going by word of mouth?

I'd generally avoid most of the Chinese suspension components too. Years ago I tried my luck with some eBay adjustable arms with the steel pillow balls. When they turned up in the mail the welding was shocking, full of pin holes, and brocken mig wire in places. I couldnt believe it could have left the factory like that. The steel tube looked like it was a piece of rolled plate and varied in wall thickness along the seam from about 3mm to 1mm in places. There was no way it was going on my car - major death trap waiting to happen. Fitting a part like that would be a major step backwards.

I have also toyed with a chinese split dump pipe, again from fleabay, the photos of the internals in the ad looked ok, but in reality looking from the opposite end when I received it, they were poor. Similar to the Chinese GTR intake pipe thread that was posted here not long ago. The quality of the stainless steel used was also very bad. This part didnt make it on my car either.

Those are the only times I've tried China parts, they never made it on my car, and I won't be buying their stuff again.

yeah, ive got a cheap local fit fmic..

i regret it now..

coz it does look poorly made..

compared to the hks/trust, or hdi/hybrid intercooler that a few of my mates have got..

and the welding and the quality of aluminum used to make the product stands out!

i bet it better for performance too!!

but u will hear people sayin..

"why would you pay $500+ just for an intercooler, wen they are made in china"

well thats what bein going around..evan japan brands..some people are sayin they are made in china,,

correct me if im wrong,,

but apart from than that..

the only thing i got thats china aswel..

is a replica greddy rs bov..which i got off ebay..

and i got say wen i got it..it looked just as good as the real thing..and sounded sweet..

but a year later..the spring is fu%k3D..and it wont open as much anymore..

the adjustable valve is like jammed/stuck..

i evan took it apart to try and fix it it..but still no good...

inside look like pretty poorish material..

like the dual springs and the seals used in this china replica.. :)

and wen seeing a real greddy rs bov inside..u can see the difference of interial materials used...

i know what bov im buying next :)

hope this helps...

Xforce hi flow cats on ebay are no good don't bother buying them. I've seen with my own eyes inside the cat compared to another 3" cat, the difference is huge! Xforce hold more restcritions. Not saying its bad, just to advise to watch what you buy on ebay!

Won't go cheap on a turbo; but IC core is fine... I'm using one from JustJap (600x300x100) and it works great; temperature differences are HUGE to say the least. At $300 for the core compared to $1000+ for a JDM similar, yeah why not.

Piping, bit of a hit n miss - I've seen really good stuff come from cheap kits, I've seen terrible stuff come from cheap kits. The JDM piping kits are precision made, fits first time every time. Easy fix - custom piping :) 1 afternoon, a mate, a bansaw, some masking tape and rulers and beer! Send it to your friend who welds alloy and its done. My FMIC setup cost me around $800 all up (core, piping, joiners, welding), still a whole lot less than going the JDM path.

Currently supporting 510hp without any dramas

intercoolers

- goto your local performance shop who works on skylines and get them to fit & supply a generic intercooler ballpark $550 fitted

- or you can go the jap brand kits, but they are much more expensive $1000 unfitted

turbos

- garrett, hks, apexi, trust, greddy, ihi, blitz, turbonetics

- avoid KKR, SuperT70, MonsterT70, Monster Power, Master Power, Monsta, T4, T3/T4s on ebay, "truck items"

Truck items such as Borg-Warner and Holset? Also, please share some of your bad experiences/knowledge about Masterpower Turbo's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...