Jump to content
SAU Community

Walbro Max Pwoer

Dearlove

By Dearlove,
in Engines & Forced Induction

 Share

Recommended Posts

wannaslide Contributor

wannaslide

Posted
Posted
hmmm i got 294 hp running a HKS 2535 pumping out 17 psi on my R33 would there be a problem?

they said they max out at like 400hp so it sounds like you would be sweet

i'v got one on the way and i would only be pushing like hopefully 260rwhp when im finished getting everything i need so i should be sweet to hey

unique1 Mentor

unique1

Posted
Posted

my mates soarer made 440rwhp on dyno with one walbro 255 and no problem in past 3 years.

In america the yanks (mostly supras and gto's, etc) absolutely love the walbros and dont even bother with bosch, these are big hp and big budget cars, they use like 4 walbros intank rather than going bosch or anything else. These guys run big workshops and swear by walbro on every car so why the bad name around here? Dont buy cheap ebay copy shit ones and you might be suprised :(

STATUS Grand Master

STATUS

Posted
Posted (edited)

i used to love the walbro's but after having a spate of them unable to crack 200rwkw latley (last november) i have been sworn against them, 3 were bought from a large victorian speed shop and the other 2 from tweak it (probably all the same batch)

fitting 040's fixed the issue on all 5 cars.

Edited by URAS
Cjmartz2k Proficient

Cjmartz2k

Posted
Posted

Most people here on Okinawa run Walbro's with no problems. I have twin walbro's in tank and have had no problems for over a year now, and I ran a single one at over 400rwhp a couple of years prior to that. That pump is still in the tank along with another one. There has been a rash of the fake ones popping up though. A lot of reputable dealers get them to distribute and don't even know they are fakes from what I've heard.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...