Jump to content
SAU Community

Recommended Posts

hmmm i got 294 hp running a HKS 2535 pumping out 17 psi on my R33 would there be a problem?

they said they max out at like 400hp so it sounds like you would be sweet

i'v got one on the way and i would only be pushing like hopefully 260rwhp when im finished getting everything i need so i should be sweet to hey

my mates soarer made 440rwhp on dyno with one walbro 255 and no problem in past 3 years.

In america the yanks (mostly supras and gto's, etc) absolutely love the walbros and dont even bother with bosch, these are big hp and big budget cars, they use like 4 walbros intank rather than going bosch or anything else. These guys run big workshops and swear by walbro on every car so why the bad name around here? Dont buy cheap ebay copy shit ones and you might be suprised :(

i used to love the walbro's but after having a spate of them unable to crack 200rwkw latley (last november) i have been sworn against them, 3 were bought from a large victorian speed shop and the other 2 from tweak it (probably all the same batch)

fitting 040's fixed the issue on all 5 cars.

Edited by URAS

Most people here on Okinawa run Walbro's with no problems. I have twin walbro's in tank and have had no problems for over a year now, and I ran a single one at over 400rwhp a couple of years prior to that. That pump is still in the tank along with another one. There has been a rash of the fake ones popping up though. A lot of reputable dealers get them to distribute and don't even know they are fakes from what I've heard.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...