Jump to content
SAU Community

Custom Door Skins And Other Mods!

BIT SUS

By BIT SUS,
in Four Door Family & Wagoneers

 Share

Recommended Posts

BIT SUS Mentor

BIT SUS

Posted
Posted (edited)

Around 6 weeks ago, I made these:

Being home from work sick, after having my tonsils taken out, I have been very bored lately with plenty of thinking and doing time...

So I've decided to get busy with with even more modifications in the stag:

  • Blue LED conversion for ALL dash lights. This included speedo cluster, climate control module, triple dash gauges, cigarette lighter socket and ignition barrel lights.
  • Blue CCFL Tubes that highlight the footwells in the front of the car.
  • Stealthy Hi/Lo boost switch for my Profec B Spec II, using the Wiper De-Icer switch in the dash.
  • Red LEDs mounted in the "eyes" of the skulls on all door trims - Coming Soon.
  • Blue CCFL Tubes in the door pockets of the front doors - Coming Soon.
  • White LED interior lights. - Coming Soon.
  • Re trimming the Gearshift and Handbrake boots with chrome leather - Coming Soon.
    Photos Coming Soon. Watch this space
    Comments, Suggestions and Ideas?

    Nigel.



Edited by BIT SUS
Link to comment
https://www.sau.com.au/forums/topic/252132-custom-door-skins-and-other-mods/
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
Prepares spew bag........

Are you sure you want to do this to your 260 nigel?

Haha! Maybe chrome isn't the way to go then... I'm going shopping for material today, so I will see what I find.

I think many of you will be pleasantly surprised with the overall outcome!

mr_infamy Collaborator

mr_infamy

Posted
Posted (edited)

To each their own, I say. People still think it's weird that I installed a Minidisc head deck in my car.

EDIT: The LEDs sound good.

Edited by mr_infamy
BKC34 Collaborator

BKC34

Posted
Posted
To each their own, I say. People still think it's weird that I installed a Minidisc head deck in my car.

EDIT: The LEDs sound good.

Are you serious????? Minidisc????? i promptly got rid of my minidisc head unit that came with my car, minidisc is the biggest flop of recording technology!

ipod/mp3/hard drive all the way! - no cds, no scratches, so much easier than filing thru a whole case of cd's/minidisc's!

BKC34 Collaborator

BKC34

Posted
Posted

and you know why? because they are crap, its basically the same as cd's

hence why mp3 players and ipods are much more popular, because you dont have to carry around a whole catalogue of cds or mini discs!

i'll admit some of the mini disc recorders were good for a band practice and stuff like that but yeh, i can easily see why the mp3 player took over

GoldZilla Grand Master

GoldZilla

Posted
Posted

True, but the cost of hard disk drives and flash memory was way too high when MD first came out. Solid State Drives are new, expensive technology at the moment, but as the price drops due to economies of scale, they will take over from HDDs, too.

BKC34 Collaborator

BKC34

Posted
Posted

hrmm i dunno, i think most people wold have trouble filling an 80 or 120 GB ipod/hd with music.... i have an 8gb ipod and it does a fine job of holding over 1300 songs, half of which i probably dont listen to lol

iamhe77 Grand Master

iamhe77

Posted
Posted
and you know why? because they are crap, its basically the same as cd's

hence why mp3 players and ipods are much more popular, because you dont have to carry around a whole catalogue of cds or mini discs!

i'll admit some of the mini disc recorders were good for a band practice and stuff like that but yeh, i can easily see why the mp3 player took over

mp3 should be outlawed.

Crap compression = HUGE loss in music quality.

I have an 80GB iPod which has 4GB left on it.

Lossless all the way baby! (ideally ripped from Vinyl)

CL11QE Proficient

CL11QE

Posted
Posted

i must say my stagea has the factory MD player, and i have an album on CD, and a mate gave me a MD he has which is the same album, and the difference in sound quality is HUGE. The MD is so crisp and clear compared to CD....just my opinion....and i know alot of people who still have and use MD and all agree it is a good system but as Nick said, it just wasnt marketed here properly....

BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
.flac is a good compression for music files. I have quite a lot of music done in this format and the sound quality is acceptable.

back on topic?

neons are in the car now, and I've hooked them up to the loom behind the ignition barrel illumination, so they turn off once the car is started.

photos coming soon.

ssshonky Grand Master

ssshonky

Posted
Posted

I think the red LED's in the skulls MIGHT get on your tits after a while.

its going to take a bit of research to find the right sized led's and the right brightness.

or you could make it like a chaser circuit where only one set of eyes comes on at any given time

or come on randomly?

BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
I think the red LED's in the skulls MIGHT get on your tits after a while.

its going to take a bit of research to find the right sized led's and the right brightness.

or you could make it like a chaser circuit where only one set of eyes comes on at any given time

or come on randomly?

i've chosen really dim red 3mm leds for that exact reason. :)

have also thought about the chaser circuit :)

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...