Jump to content
SAU Community

Recommended Posts

As promised I will keep you guys informed of any developments. Here are some pics of my first go at the black tint on a D22 Navara Headlight. After rigorous training the navara light is quite a challenge to get right due to the nature of the contours in the lense. I think it looks quite nice compared to the light that is not done. Bare in mind that it is not easy to capture this tint on a camera with a flash as white light penetrates the tint and reflects the chrome background straight back, so to the naked eye it looks a little more tinted than in these shots but you get the idea.

post-38017-1238102582_thumb.jpg

post-38017-1238102600_thumb.jpg

post-38017-1238102615_thumb.jpg

post-38017-1238102640_thumb.jpg

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

I don't get why people are going off about this, how its defectable etc. I understand that if a copper sees the "dark black" tint (and is a tight ass) and decided to pull you over, and you manage to show him its ADR approved, he cannot do shit, but i DO agree that he will most likely look like a dumb ass afterward and try and get you for something else.

Hence on a Skyline forum with the majority of cars being either a 'Skyline' of some sort of Nissan import/tuner, we all probably have some sort of defectable part or system on our car even if its dead stock!

That being said i don't like any of the colours other than the 'controversial' black tint. It does look nice and its suttle, it isnt jet black like that silver R33 that looks like every panel put on it has been done cheaply and tacky.

The way i see it if you think it just adds to the list of trouble you could possibly encounter with the police, than don't even consider it, but its not a bad idea, and it can boost the potential looks of certain models when done professionaly. I would definately be interested if i purchsed another set of new 34 lights for my car :laugh:

Hope the sales and promoting go well for you!

The cops probably wouldnt notice, those colours arent even that dark

Funny you should say that. One of the trained applicators in WA was pulled over in a modified pulsar. Went over the car. The cop never picked the lights which were done in black.

can this stop the 33 lights catchin teh yellow fever?

Yes the tint is a liquid headlight protector that does just that. Sort of like a 2pak resin that goes rock hard. this stuff is imunisation for yellow fever. my CRYSTALITE photo page < check the half light in light blue

I tinted my R32 lights years back.

It wasn't for a road car but was being built for the track. Anyway here's a pic.

abcvqh.th.jpg

But yea, I sort of agree it's stupid tinting headlights if it's going to be for the road.

Edited by Chang
Headlight tinting is for the gays - I even pulled out my ghey HID's for standard globes, cause you can see fk all with projector headlights! Who'd want to make it worse?!

You pulled out HID's and went back to halogen bulbs......they must have been some shit HID's. I can see furthur with my HID's pointed down than i can with my high beams pointed up.

I wouldnt mind a light tint on my headlights after a nice cleanup; the left xenon light on my r34 gtr has a small amount of 'foggy' whatever on the top.

The coloured ones im not a fan of

has anyone ever seen a nissan x-trail with blue tints on the headlights? factory option?

  • 2 weeks later...
There is a product called 'crystalite' that now has ADR approved headlight tints. Its not a film but a micro resin that bonds to the light. It is quite expensive because you can't DIY. Needs a qualified Applicator. 5 or so colours and claims to be heaps stronger than the OME light (polycarbonate lenses) surface so scratches are avoided. Tell me what you reckon? click the link!

http://www.flickr.com/photos/12281250@N02/

PS. I am considering becoming an applicator.

tinted headlights are velllllyyyy niccce

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...