Jump to content
SAU Community

Wanting To Drop My Coupe! [moderate]

GT350

By GT350,
in VQ Series - V35, V36 & Infiniti

 Share

Recommended Posts

GT350 Enthusiast

GT350

Posted
Posted

Hi all, wanting to Drop my 03 prem/coupe, I have 19'' rims F.8.5 22o/s and R.9.5 30o/s would like a nice moderate drop also, around 20mm + all corners, I have searched many forums G35Driver.com etc they talk of Tein S/Techs and H/Techs springs most often, I don't want coilovers, current shocks have only 20,000k on them but I will upgrade my shocks later,' SO WHATS THE GO GUY'S ', What springs is everybody useing here in AUST with good ride hight, and ride quality, and with no problems on our roads, can anyone HELP! Regards G.T.

Link to comment
Share on other sites
BLISTC Experienced

BLISTC

Posted
Posted

hey mate

i have TEIN Comfort Sport coilovers and they are lowered on their max

i am on 19" rims the car looks so much better lowered.

however due to the cars length, it can easily scrape under the car on high speed humps

it usually scrapes on the underbody brace.

Link to comment
Share on other sites
str8g Contributor

str8g

Posted
Posted

Hey i have 350z King springs on my car. They are a bit softer than the standard springs and you can probably get them for a cheap price. They are also ADR approved. check my link below.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      Both of those things are on my to do but not quite in a position to do that just yet until I can at least get it running back to stock. Going to work on getting the exhaust manifold gasket and studs replaced first, an obvious need it now. Then I'll try out the new maf and see hownthat does. After that I'm thinking cas if I'm still having the same issues. Still need to run the fuel out and refuel I'll change the fuel filter tomorrow along with cleaning the iacv with carb cleaner. If all else fails I'm going to get a serial port and see if I can get some sort of data on what the ecu is seeing when the issue is happening but really hoping one of the methods above work out first. After I get a good base I'm going link but have to save for that so it'll be a while for that based on my tuners suggestions. Definitely need the exhaust leak fixed first though car has always fallen flat after about 4-4500 rpm since I've had it and suspecting that's the issue. Then I can move forward with the rest. 
    • Kinkstaah
      Rebuild vs second hand NEO?

      By Kinkstaah · Posted

      My vote is rebuild s2 engine or maybe get a neo (but expect you may need to rebuild that too). Doing an engine conversion you would have to be a true tragic nowadays and actively be aware there's better/smarter options for value.
    • Kinkstaah
      Rebuild vs second hand NEO?

      By Kinkstaah · Posted

      Or buy one someone built earlier! (realistically V8 mustangs or MKV supras are great). I see people nowadays putting ZF8's into MK4's, and people putting 370z gearboxes, diffs, axles into R and S chassis and it's like.... just get a 370z at that point and mildly boost the 3.7 instead of the 2L and away we go...
    • WMDC35
      Rebuild vs second hand NEO?

      By WMDC35 · Posted

      If you're going to go v8 or really any swap now with all the tax, I'd most likely just get rid of the car and start with something else. Unfortunately, I have a mate with a surplus of ls and Ferrari/Maserati v8's that's always tempting me FFS lol.
    • WMDC35
      Rebuild vs second hand NEO?

      By WMDC35 · Posted

      If you can get a clean, tested neo from Japan for $3500 these days, it's probably worth getting either way, hard not to be skeptical at that price. Otherwise probably rebuild the s2.
×
×
  • Create New...