Jump to content
SAU Community

Recommended Posts

unless they have created one in the last 3 months, they do not do one.

Only for S1 & S2 Stags.

If you speak to Mike & they do, please let us know. There are a few guys on here that would be very interested.

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/253072-m35-shift-kits/#findComment-4376063
Share on other sites

unless they have created one in the last 3 months, they do not do one.

Only for S1 & S2 Stags.

If you speak to Mike & they do, please let us know. There are a few guys on here that would be very interested.

I spoke to Mike in September last year and they said they can do it. They don't have a spare valve body so they can swap it on the spot like they can the C34. From memory he said about 2-3 days to do the work.

Cheers

Andy

Link to comment
https://www.sau.com.au/forums/topic/253072-m35-shift-kits/#findComment-4376067
Share on other sites

I spoke to Mike in September last year and they said they can do it. They don't have a spare valve body so they can swap it on the spot like they can the C34. From memory he said about 2-3 days to do the work.

Cheers

Andy

I stand (sit) corrected.

So I guess they are not couriering it out to people in other states then?

Link to comment
https://www.sau.com.au/forums/topic/253072-m35-shift-kits/#findComment-4376073
Share on other sites

try knox autos in rowville, and also there is this thing called capslock, when the light is on its BAD

Knox Autos = 4 speed box only at present.

I spoke to them and had to explain what the car was, let alone get a price on a shift kit.

unless they can get hold of the MV kit, I suppose.

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/253072-m35-shift-kits/#findComment-4376977
Share on other sites

I was in adelaide over new years and was very tempted to get mine done.

Would be very interested in hearing from anyone who gets this done!!

And I will definitely be keeping it on the todo list - might not be this year though... :P

Link to comment
https://www.sau.com.au/forums/topic/253072-m35-shift-kits/#findComment-4379004
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...