Jump to content
SAU Community

Vl 308 To Rb20det

sickm8

By sickm8,
in General Automotive Discussion

 Share

Recommended Posts

sickm8 Enthusiast

sickm8

Posted
Posted

hi i know this has probably been asked many times but i cant seem to find anything on it. i got a vl calais with a carby v8 and 3 speed auto and its on gas. im about to buy an r32 4 door skyline with front end damage. its got a rb20det and auto transmission.

my question is how hard is it to drop the r32 engine and gear box into the vl?

wat other bits do i need?

do i need to get exhaust made up or will r32 bolt up?

much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/254191-vl-308-to-rb20det/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted
wen its done i will be selling it. wanna get a house

It will probably cost you more to do it than the end sale price...

Why not just get rid of both and not wasteyour time???

Not being rude, but VLT's are pretty cheap. What makes you think a non-original 2 litre version of a VLT is going to be an attractive car???

(attractive meaning get a few bucks from its sale)

IE> If I were looking for a turbo VL, id be going for an original 3 litre version where insurance and the police wont give me a hard time about mod plates

I mean the rb20 is not the greatest motor for torque or outright power, then you put it in a heavy chassis...

R33_Dude Rising Star

R33_Dude

Posted
Posted

Why replace the 308? They are a strong engine, parts are cheap, a few bolt ons (or if you can be bothered tearing the engine down) or a stroker kit and you can push great, usable numbers with amazing bottom end torque. This isn't to mention it has 2.5 times, or thereabouts, the capacity of an RB20.

My advice would be to look at a 308 to 328/355 stroker kit with SCAT crank and conrods. Like these http://www.pro-stroke.com.au/stroker_kits.html

or if you can't be arsed doing that go with edelbrock heads, intake manifold and a nice mild/hot (depending on your preference) crow cam.

Also convert to PULP.

Of course if there is a reason as to why you would do such a conversion other than "because" fair enough and good luck to you.

mystery_kid Mentor

mystery_kid

Posted
Posted
Why replace the 308? They are a strong engine, parts are cheap, a few bolt ons (or if you can be bothered tearing the engine down) or a stroker kit and you can push great, usable numbers with amazing bottom end torque. This isn't to mention it has 2.5 times, or thereabouts, the capacity of an RB20.

My advice would be to look at a 308 to 328/355 stroker kit with SCAT crank and conrods. Like these http://www.pro-stroke.com.au/stroker_kits.html

or if you can't be arsed doing that go with edelbrock heads, intake manifold and a nice mild/hot (depending on your preference) crow cam.

Also convert to PULP.

Of course if there is a reason as to why you would do such a conversion other than "because" fair enough and good luck to you.

this post is common sense

put a 5 speed gearbox behind it, or do you only have an auto license? (lol)

sickm8 Enthusiast

sickm8

Posted
  • Author
Posted

cheers for the info guys. didnt realise the rb20 was so disliked lol, the reason i gonna go the rb20 was because the car its comin from has done under 100k and and at a good price. but yeah i might leave it as it is.

how much are rb20det and gearbox worth these days?

VB- Veteran

VB-

Posted
Posted

like 1000-1500.

go on calaisturbo and look for the rb20 thread. lists all the parts you need for the conversion, and everyone whose been nothing but let down by it. theres just no low down torque for big, relatively heavy car. most people start with an RB30, and the conclusion was your beter off to turbo that, starting from a V8, i'd do as suggested above

bozodos Grand Master

bozodos

Posted
Posted

Correct me if I'm wrong, but don't the R32 and VL have similar weight? It would be moreso the 3.08 V8 diff, or even the 3.45 VLT diff that will let down the rev happy RB20 - IIRC most of the whinging about them on CT was due to the unhealthy fixation with drag cars on that website. You will find a ton of info there about a conversion though, just beware the amount of wankers and schoolkids that tend to congregate on there.

QWK32 Veteran

QWK32

Posted
Posted (edited)

on the rego sticker on the vl i had ages ago it was 1200ish kg. the rego sticker on my R32 said 1300ish kg. i remember when i had both of them, comparing the two and to my supprise the 32 was heavier.

edit: and yes, a straight swap with the rb20 and they dont go that well. once i put 4.11s in my vl (rb20 conversion) it went alot better.

Edited by QWK32
VB- Veteran

VB-

Posted
Posted

rego stickers are bs for weight. my mates soarer says its 1250 lol

i dont think there would be much in it, either way, but its still got no low down torque, especially when you look at results of turboing the RB30, or mod the v8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...