Jump to content
SAU Community

Vl 308 To Rb20det

sickm8

By sickm8,
in General Automotive Discussion

 Share

Recommended Posts

sickm8 Enthusiast

sickm8

Posted
Posted

hi i know this has probably been asked many times but i cant seem to find anything on it. i got a vl calais with a carby v8 and 3 speed auto and its on gas. im about to buy an r32 4 door skyline with front end damage. its got a rb20det and auto transmission.

my question is how hard is it to drop the r32 engine and gear box into the vl?

wat other bits do i need?

do i need to get exhaust made up or will r32 bolt up?

much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/254191-vl-308-to-rb20det/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted
wen its done i will be selling it. wanna get a house

It will probably cost you more to do it than the end sale price...

Why not just get rid of both and not wasteyour time???

Not being rude, but VLT's are pretty cheap. What makes you think a non-original 2 litre version of a VLT is going to be an attractive car???

(attractive meaning get a few bucks from its sale)

IE> If I were looking for a turbo VL, id be going for an original 3 litre version where insurance and the police wont give me a hard time about mod plates

I mean the rb20 is not the greatest motor for torque or outright power, then you put it in a heavy chassis...

R33_Dude Rising Star

R33_Dude

Posted
Posted

Why replace the 308? They are a strong engine, parts are cheap, a few bolt ons (or if you can be bothered tearing the engine down) or a stroker kit and you can push great, usable numbers with amazing bottom end torque. This isn't to mention it has 2.5 times, or thereabouts, the capacity of an RB20.

My advice would be to look at a 308 to 328/355 stroker kit with SCAT crank and conrods. Like these http://www.pro-stroke.com.au/stroker_kits.html

or if you can't be arsed doing that go with edelbrock heads, intake manifold and a nice mild/hot (depending on your preference) crow cam.

Also convert to PULP.

Of course if there is a reason as to why you would do such a conversion other than "because" fair enough and good luck to you.

mystery_kid Mentor

mystery_kid

Posted
Posted
Why replace the 308? They are a strong engine, parts are cheap, a few bolt ons (or if you can be bothered tearing the engine down) or a stroker kit and you can push great, usable numbers with amazing bottom end torque. This isn't to mention it has 2.5 times, or thereabouts, the capacity of an RB20.

My advice would be to look at a 308 to 328/355 stroker kit with SCAT crank and conrods. Like these http://www.pro-stroke.com.au/stroker_kits.html

or if you can't be arsed doing that go with edelbrock heads, intake manifold and a nice mild/hot (depending on your preference) crow cam.

Also convert to PULP.

Of course if there is a reason as to why you would do such a conversion other than "because" fair enough and good luck to you.

this post is common sense

put a 5 speed gearbox behind it, or do you only have an auto license? (lol)

sickm8 Enthusiast

sickm8

Posted
  • Author
Posted

cheers for the info guys. didnt realise the rb20 was so disliked lol, the reason i gonna go the rb20 was because the car its comin from has done under 100k and and at a good price. but yeah i might leave it as it is.

how much are rb20det and gearbox worth these days?

VB- Veteran

VB-

Posted
Posted

like 1000-1500.

go on calaisturbo and look for the rb20 thread. lists all the parts you need for the conversion, and everyone whose been nothing but let down by it. theres just no low down torque for big, relatively heavy car. most people start with an RB30, and the conclusion was your beter off to turbo that, starting from a V8, i'd do as suggested above

bozodos Grand Master

bozodos

Posted
Posted

Correct me if I'm wrong, but don't the R32 and VL have similar weight? It would be moreso the 3.08 V8 diff, or even the 3.45 VLT diff that will let down the rev happy RB20 - IIRC most of the whinging about them on CT was due to the unhealthy fixation with drag cars on that website. You will find a ton of info there about a conversion though, just beware the amount of wankers and schoolkids that tend to congregate on there.

QWK32 Veteran

QWK32

Posted
Posted (edited)

on the rego sticker on the vl i had ages ago it was 1200ish kg. the rego sticker on my R32 said 1300ish kg. i remember when i had both of them, comparing the two and to my supprise the 32 was heavier.

edit: and yes, a straight swap with the rb20 and they dont go that well. once i put 4.11s in my vl (rb20 conversion) it went alot better.

Edited by QWK32
VB- Veteran

VB-

Posted
Posted

rego stickers are bs for weight. my mates soarer says its 1250 lol

i dont think there would be much in it, either way, but its still got no low down torque, especially when you look at results of turboing the RB30, or mod the v8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hypergear
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By hypergear · Posted

      I usually source pressure on inlet manifold after throttle body
    • timmy94
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By timmy94 · Posted

      Where is the best location for boost pressure source when running mac 3port boost solenoid?  my new turbo does not have a fitting for that on the compressor housing.  how come Garrett make a turbo without that?  im confused 
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      From my memory, which isn't that great, we did have issues getting the large throttle body on my old LS1 to play nicely at idle, first it would stall, then it would only idle at 2k rpm, then it would hang at 2k rpm for a few seconds and then drop and stall, then, finally, the best we got was it would hang at 1.5k rpm for a few seconds then drop to around 800 rpm The tuner stated that large cable throttle bodies are a PITA, and if I wanted anything better than what we ended up with I would need a electronic throttle body and all of the aftermarket ECU stuff to run it
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, my intake arrived  I'm not happy with the coating finish so I went to Supercheap and got some black wrinkle paint and some prep stuff I was initially thinking about using grey wrinkle paint, but finding a quality product that gives the texture I want was "unfindable...", so the tried and tested black wrinkle paint is again finding its way into the engine bay for the OEM look I'll sneakily head into work and get the big ovens cranking to cure the paint over the next week or so I've also contacted MX5 Mania today to talk about the install and tune, so painting it is my "main effort" prior to sending the car off In other news, the correspondence from the US supplier is fair to midling to say the least, I'm still trying to track down the intake box thingie with the larger intake pipe to suit the throttle body, it still is "awaiting fulfilment" (no stock currently available), if it isn't here soon I'll just get MX5 Mania to fabricate up a CAI that is easy to service the air filter  
    • gifted1
      Will r33 gtr front reo fit on r33 gtst series 1?

      By gifted1 · Posted

      Thanks mate. I thought it would be that way.
×
×
  • Create New...