Jump to content
SAU Community

Recommended Posts

Ok everyone, time to organise my own cruise. This is a completely open cruise, so invite all your mates to come along. This is a day time/evening cruise so bring your cameras and grab some nice photos of everyones cars.

Date: Saturday 7th of March

North of the river people heading to Final Meetpoint: Citywest carpark, arrive 5:30pm. Depart to South Street Park n Ride 6:00pm Sharp.

Official Meetpoint: South Street park n ride (Quick n easy meet point for both Nth & Sth people).

Time: Everyone arrive at South Street Park n Ride at 6:15-6:30pm, Depart 7pm sharp

Maps: Will be handed out at the meetpoint (South street Park n Ride).

Bring: Full tank of petrol, CB radios if you have them, ect

*Remember: behave. Keep the music at a moderate level, no burnouts, fuel up, drive safe and have a awesome time!

Feel free to post this on a few other forums to get interest up.

Link to comment
https://www.sau.com.au/forums/topic/254414-large-cruise-saturday-7th-of-march/
Share on other sites

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Thought this was on during Drift battle,

but i should be Able to make this one aswell as seeing the Drift battle haha :P

Edited by Stealthed

Julz: if you notice, the first post is actually similar formatting to your cruise thread, so is the first meetpoint and time. I may have used your idea of coastal sunset drive. But the map isn't the same.

Mel: Last Drift Battle finished about 4, so I'm hoping it does this time as well. I don't want everyone to miss my cruise to go to Drift Battle.

Julz: if you notice, the first post is actually similar formatting to your cruise thread, so is the first meetpoint and time. I may have used your idea of coastal sunset drive. But the map isn't the same.

cool wouldnt care if u wana use the same map i still have it, but u prolly wana use ur own little touches haha, should be nice man!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...