Jump to content
SAU Community

Recommended Posts

Not likely mate Piggaz 2.8L stroker with all the fruit is probably at around 20psi @ 4K. Full boost on your car would be around 5-5.5K id say.

I'd hope not - my GTRS's were on full song @ 5.5krpm.

When I had -5s, the turbos were getting tickled at about 3.5krpm and pretty were in 'get up and boogy mode'.

Both examples on 2.6ltr.

Not likely mate Piggaz 2.8L stroker with all the fruit is probably at around 20psi @ 4K. Full boost on your car would be around 5-5.5K id say.

I'd hope not - my GTRS's were on full song @ 5.5krpm.

When I had -5s, the turbos were getting tickled at about 3.5krpm and pretty were in 'get up and boogy mode'.

Both examples on 2.6ltr.

Sounds about right.

That thing of Paul's is a weapon, and not the average build. It's got ALOT of rnd and tricks, all of which work. A lot of secret squirrel.

yep totally agree with you.

IMO -5s on stock 2.6 will see full boost around 4.5-5K - if you get it earlier than then I want to know.

firstly are you really running 25lb????

secondly if you are, how bout you throw a dyno chart with boost / rpm curve so we can see at what RPM your really making at full boost with -5s....then we will all know.

Edited by Ants

I'd really like to see an overlay of -9s with -5s on a dyno graph.

:)

Does anyone have this info or happy to post their graphs running -9s and another with -5s...from here, we can overlay to see the difference...would put a lot of debate to rest

I'd really like to see an overlay of -9s with -5s on a dyno graph.

:)

Does anyone have this info or happy to post their graphs running -9s and another with -5s...from here, we can overlay to see the difference...would put a lot of debate to rest

There is one out at unigroup on the same car. On the dyno, they came on exactly the same but the 5'a made more grunt. However, to drive they were a TOTALLY different car!

What's wrong with running 25 psi Ants? :P

LOL....I was wondering when you were gonna say somethin.......aside from being a ship load of boost nothin really just curious.....about how long an engine would last if predominately driven at that boost level :glare:

Edited by Ants

There is one out at unigroup on the same car. On the dyno, they came on exactly the same but the 5'a made more grunt. However, to drive they were a TOTALLY different car!

That is odd Paul. Dyno shows that they huy full boost at same rpm?

firstly are you really running 25lb????

 

secondly if you are, how bout you throw a dyno chart with boost / rpm curve so we can see at what RPM your really making at full boost with -5s....then we will all know.

Didn't answer the question.. why the doubt? I am offended.

That is odd Paul. Dyno shows that they huy full boost at same rpm?

Ill try and get the sheet. Or it could have been the power low end was the same but boost levels were pushed to the right a tad on the 5's.

Leave it with me.

LOL....I was wondering when you were gonna say somethin.......aside from being a ship load of boost nothin really just curious.....about how long an engine would last if predominately driven at that boost level :glare:

I spose the tune would have a massive part in this. Mine lasted 7 years with anything upto 2.0 bar shoved down it... Only died because the oil pump had a hissy fit.

yep totally agree with you.

Mate I watched a built 26 with -5's and poncams on a dyno for a good hour and full boost was by 5000 and it went to 345kw iirc. No chance of getting -5's in by 4 on a 2.6L ;)

IMO -5s on stock 2.6 will see full boost around 4.5-5K - if you get it earlier than then I want to know.

  • Like 1

I know Paul.....I know. I'm just conservative and want to have an engine tuned to last as well (I will certainly not push my advance spec beyond 25psi). Your car is insane and would of loved to have a 2.8ltr with similar mods to yours :)

Keen to see those graphs though.

Edited by Ants

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...