Jump to content
SAU Community

-7/9s Or -5s Garretts


Adz2332

Recommended Posts

-9's stock internals

-5's build engine

If you have stock engine and plan in doing a build as well go -5's saves u $ in the future

I still believe -9's on e85 would be a killer street setup....

  • Like 1
Link to comment
Share on other sites

I'm planning on going the e85 route I think. Having to build my engine now. Previously I thought I had just blown a turbo so I bought and installed -9s. Thinking -5s would be the better op on e85 + re built engine..

Link to comment
Share on other sites

I think the -9s on e85 would be whey better, but then again I've been in very quick sr20's and 4g63's, so I know what instant torque on tap is with a 4banger. Once u go torque, u never go lag again

Link to comment
Share on other sites

^^ got a dyno sheet?

Nah haven't got one. Take it down the strip soon and I will see what mph it pulls. That will tell me what power it puts down. Old school way and most accurate IMHO.
Link to comment
Share on other sites

Nah haven't got one. Take it down the strip soon and I will see what mph it pulls. That will tell me what power it puts down. Old school way and most accurate IMHO.

I was more after the shape of the curve.

Still good, be interesting to see what you pull

Link to comment
Share on other sites

Look ok I did 12.2 @ 119mph and had 300rwkw. Very bad driver but whooped the ass of a charged commo with slicks.

Edited by Ants
Link to comment
Share on other sites

I think the -9s on e85 would be whey better, but then again I've been in very quick sr20's and 4g63's, so I know what instant torque on tap is with a 4banger. Once u go torque, u never go lag again

'Instant torque' how instant are we talking with the -9s? Are they known to pull all the way to redline? With a new set of cams that is..

Link to comment
Share on other sites

some of the guys with that setup could tell ya more regarding that, but more importantly whats your budget?!


These days 34 GTR N1's can be had for 4 cheap! I'd be focusing on that with the e85 and the cam gears with the tuning!


No need for cam shafts until later if ever



Does anyone know how fast i'd be be going if it took me an hour to get to my destination and the distance was 100km?

Link to comment
Share on other sites

^^ Is this a trick question? lol

-5's on built engine with E85 would be the way i would go and if it is in the budget get the 2.8 as it would make them that much better. Here are 2530's (-5's) on a 2.6 with E85. Compare this with other set ups with a 2.8 and the difference is night and day.

Couldn't find the one with RPM.

IMG_0945_zps323e40b2.jpg

Link to comment
Share on other sites

Any one got a rough idea how much power my 32 GTR should be putting out if I can a 12.3 at 112mph?

By the mph about 240-250kws at the wheels Edited by XGTRX
Link to comment
Share on other sites

King87 u made 150hp@ 100km/h = winning.. awesome top end tho! But in all honesty wouldn't 2530's be better suited to a 3.o bro or 3.2/3 for the street?

By the mph about 240kws at the wheels

I'd say 240.318kws @ the dildo shifter to be precise

Edited by discoPumpkin
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I live in Thangool I cannot buy E85 fuel there or Biloela not many servo's sell it Rockhampton the  Ampol in Gracemere won't even sell 98 , it's hard to own a high performance car in CQ and NQ . 
    • Sounds like a good excuse for a trip to Australia! But yeah, trying it out is probably the best way to go about it. Please report back what you find.
    • Well as I will have both S1 and S2 front parts i will see what works best out of the two. Im not fussed if i need to drill extra holes, and im a big fan of Nutserts/rivet nuts and a nice painted dome head bolt as a way to hold stuff in place where plastic clips have broken and are hard to source new ones
    • Yeah truthfully it seems like the headlight supports for the ALTIA and S2 should be the same, but they aren't. I can only guess that the grill area of the Altia bar is different to the grill area of the S2 bar. Either that or it's due to the S1 bar having an angle up to the center bar that the Altia doesn't, or something. That said, I recently bought an Altia bar myself, and I fit it over the S1 brackets and thought "Yes, this will all work fine" so even as I doubt my own words as I post, I also daresay you'll be okay.
    • Me too. Apparently the new version of Invision will allow some customisation so look forward to a 'Love' reaction and a new 'Like' icon.
×
×
  • Create New...