Jump to content
SAU Community

Recommended Posts

Originally posted by riggaP

The tyres wernt changed during complience coz they're sold here in Oz. Bridgestones with 65% tred. Lucky coz it saved me $100s.

Anyway after they die (shouldnt be too long now) its 255 rear, 235 front on a nice set of  18s!:P  Hopefully I'll be able accelerate in the wet... even after a few more mods!:D

Hey the wider the tyres the more trouble u will have with spinning in the wet :)

More surface area on tyre easier to aquaplane

Its a real bugga mine loses traction so easy in wet but is good in the dry....

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-52936
Share on other sites

Originally posted by macka

205s will probably be better in the wet than 255s  

you have more weight on less area which sticks to the road wider tires hold more water

dry different story :-)

:what:

Does that mean if I put 14" 165s on the back I'll get more traction than 18" 265s????:confused:

So 1370kg on a 205 = more taction than 1370kg on 255 (19.6% bigger)?????

Call me dumb but that does not make any sense whatsoever.

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-53469
Share on other sites

hehe confusion..

There isnt a theory behind it..

And its a long one...

you need to penetrate your tyres thru the water to get grip on the tarmac.

The bigger the tyre the harder it is to penetrate thru u will find it may be easier to spin in normal conditions.......

If you put your foot down of course the skinnier tyre ids going to lose grip quicker but if u have over 200hp at wheels i try to keep boost off

I hit 10psi @100km down the freeway in 3rd and back swung out all of a sudden i was looking at the middle of the train line and skipped a few heart beats....

Still get your 265s there all good :burnout:

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-53525
Share on other sites

what macka's saying is right

the wider the tyre in the dry the better

the wider the tyre in the wet: the more likely the car will fish tail and spin out under power & cornering, Due to the tyre not cutting through the water lying on the road the tyres on my car seem to float over the water.

I also try to stay off boost in the wet

but in saying that it can also make for more FUN when its wet.

(WET WEATHER ACTION) :) :eek: :(

Regards DAMQIK

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-53603
Share on other sites

I understand the theory, but I can't believe thats what will happen in practice. There has to be a point where the more width of the rubber outweighs the amount of water they hold. ie the wider they are the more water they can hold before you get the aquaplane effect.

I'll have to experiment and find out.:)

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-53623
Share on other sites

  • 2 weeks later...

Sorry guys but its still buggin me. I went to a tyre place today and spoke to the dude there who supported your theory for crap tyres, but, he also said that the technology in the high end rubber will hold better in the wet the bigger they get.

So I guess everyone wins...

S13 Silvia, how did you go with gettin the car fixed??

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-59718
Share on other sites

Yeah, I fixed it within a week :rolleyes:

I bought a castor rod $95 at local import wrecker and a

Left Transverse Link Assembley (suspension arm) for $40 including postage off another car enthusiast.

I unbolted the old suspension arm and castor rod and fitted the new stuff, it wasn't too hard when you think about it except I had trouble getting some of the bolts off (needed at least 2 people's torque) but now when I steer sometimes I get a light banging noise and I've tried to find out what it is but to no avail, I'm still trying to find out.

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-59735
Share on other sites

argh i had the same problem, and now im having the same noise issue...

Its either when u turn all the way, or u go over a speed hump/etc, u get a creeking noise from the front left (in my case).

Ive had it checked out, they couldn't find problems, had it all greased up, same problem still...Getting the steering rack colunm replaced atm, so ill let u know if it makes a difference :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-59752
Share on other sites

lolol it ****en ****s u aye :rolleyes::):D

For the life of me i have nfi whats causing it...

They went over the springs, brushs, joints, everything, no problems. They oiled it all up hard, which made some difference (better but not perfect, and im touchy bout **** like this :D).

I'll let u know when i get my car back, should be friday

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-59761
Share on other sites

sure does! :)

It's a bast**d.

I got my mate to steer it lock to lock on the spot and drive slowly steering lock to lock and going over bumps and I couldn't work out what it was. I oiled all the joints I touched and also WD-40'd everything at a different time and it had no effect. No idea! But over the weekend, I ran up the ass of a Magna (woman driver.....even though technically it's my fault :rolleyes:) and also lost 3 demerit points! So that problem hasn't been at the forefront but it would be good to know wtf it is!

Link to comment
https://www.sau.com.au/forums/topic/2567-drift-repair/page/2/#findComment-59766
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...