Jump to content
SAU Community

Recommended Posts

THIS THREAD IS BEING MAINTAINED TO KEEP IT SPECIFIC TO DRIFT TECHNIQUES, PLEASE DO NOT BE OFFENDED IF YOUR POST IS REMOVED OR EDITED

I've been thinking more and more about how to explain how to learn the art of Dorifto...... And then I remembered something that helped me a lot. Grass drifting.

I had a mate back in adelaide that had a big grass paddock, we used to have so much fun keeping the pedal flat in top gear and generally going nuts on a surface with almost zero traction.

Hours and hours of practice doing this should get you comfortable with the MOMENTUM of a vehicle that is sliding, and this can be done with very low FRICTION on the back tyres (they spin easy) and should also get you used to sideways ACCELERATION (like speedway cars)

Now of course, many of you will not have access (legally) to a large grass area, so the next best thing is dirt (can damage paint on your car) or large paved or tarmac areas wet down. The FRICTION of these surfaces is a lot higher, so be carefull.

Drifting is all about PHYSICS:

MOMENTUM, FRICTION, and ACCELERATION.....

Doc.

Use the FORCE Luke.....

Simon, you are so right, it's all about becoming one with the car.... You need to know what it's going to do (brain can calculate laws of physics using previous experiences as reference points in a split second).....

When people ask me how I drift so well, it's like ..... "well it's like this, I'm not really sure other than that's just how I've always done it"

WHEN DRIFTING.... I AM THE CAR, I AM MY OWN DRIFT UNIVERSE, with specific understanding of all the variables in your environment, you can calculate a drift.

The first step is understanding how your car behaves while sliding. The basic idea is just keep the back wheels spinning the whole time.

Try and get hold of some spare bald tyres to put on the back of your car and find a wet skidpan or carpark, this makes them easier to keep spinning without accelerating too much.

TIP 1: To keep your wheels spinning without accelerating make your right foot 'PULSE' slightly on the accelerator. This means the rear wheel speed is constantly changing and makes them harder to start gripping. Do not just hold your foot flat.

TIP 2: When your wheels are spinning, use the brake with your left foot to control car speed, like a burnout, only less brake and moving slightly faster.

PRACTICE EXERCISE 1: Firstly is try doing large circle drifts. These are quite difficult, but can be prictised at low speeds and help you learn quickly. I tried a quick sketch to show what I mean. Dump the clutch and get the wheels spinning.... move forwards a little and move the steering wheel to the right sharply, this should make the back of the car slide to the left, now you should be able to turn the steering to the left with the car doing a right hand curve. If you keep pulsing the throttle you should start getting the hang of it, try making the curve tighter and longer and gradually you will make a full circle. After you get a circle done, try and do two or three in a row.

Most people will find they find right hand or left hand circles easier, firstly get good at the preffered one , then try and get them going the other way (I'm still not 100% on left hand circles)

PRACTICE EXERCISE 2: Similar idea to above, but have a left and right hand circle joined together.... Sketch attached (don't laugh it only took 8 seconds to draw)

NOW GO MY CHILDREN, PRACTICE AND LEARN, USE THE FORCE

WITH TRAINING AND PRACTICE YOU TOO MAY BECOME DORIFTO MASTER.

Guest Simon-MrRx7

Ok.. heres my tips

Tip one: Get used to the feeling of looking out the side windows

Tip two: Go wide and then drift closer to the apex... so if u slide out.. you've got the whole of the road in which to loop out in, less chance of hitting stuff, gutters and tree's do a LOT of damage.

Tip three: the best method of initating a slide is the old handbreak followed by clutch drop, then press accelerator to hold the slide, however to get these three things right one after the other takes a lot practice. What i tend to do is approach a corner (say its a left hand corner for example) i'll go out wide turn in sharply to the right then turn sharply to the left whilst at the same time clutching it, giving it a few thousand rpm extra then dumping it,

what this is doing is using weight shifting techniques also known as a scando flick. Well set up cars need not to use the handbreak or clutching it. I used to have my RX7 set up well for this, with 17inch high grip tyres on the front and stock rims with ****ty 14inch tyres on the back. I would do the above method approching the corner and use weight shift plus some throttle to initiate a slide.

Whilst drifting i would modulate the throttle and steering imputs to hold the angle and speed of the slide through the corner and well after the apex

Tip Four: Dont practise in front of people... pressure makes u loose concentration.. last thing u wanna do is wack a gutter in front of your mates cause they put u off.

Guest Simon-MrRx7

ahh yes... as mentioned by Dr Drift... Opposite Lock Ringies are excellent practice for car control

everyoine knows the basic ringies where you loop the car round and round in a tight circle... But what about when ur are holding one big drift using opposite lock steering :cool: that, my friends, is where u learn quickly how to drift, because it teaches u how to hold the car at the angle u want it.

I can hear the skid pan at Deca calling me

Dr_drift.

with the sprinklers blaring your right in the wet it is much easier.

Simon as you say dont practice in front of you mates, may be thats why Dr_drift dissapears to the melbourne version of mt Akina and I return there to see all of these mysterious black marks :-).

good reading and good advice

meggala

Doxx, Meggala and anyone else:

Secret location of Melbourne's mini Mt Akina. I suggest we do not publisise it's location as this will reduce the longevity of this secret location as a no-cop zone...

ANYONE IN VIC INTERESTED IN DRIFT MEET PM ME.

doing the clutch dump works but is brutal on the car... i wouldnt recomend it.

firstly have enought power to avoid the above technique so as to actually kepp you cars running gear in one peace. but i supposes if you r a hard core drifter abusing your car is paramount.

i find entering the corner silghtly above the recomended speed do your shift too third. gice the car a little flik(scandanavian). by which timeyou should be left foot braking.. this trail braking will bring round the rear cause of the flik. now as the car brakes free appy power (170rwkw) should easyly fry 3rd with 17 on now you do you madulation with power and brakes as the doc ordered.

now as the car finnnishes that corner and fliks the opposit way on the transition grab 4th and fry them some more. point to note that you will need 200rwkw to fry 4th. (no modualtion in forth on the power cause you will need it all to spin the tyre however you can still use light dabs of the brake )then continue till you **** yourself

other recomendations youneed a mechanical diff to pull 4ths. and at least a solid 2 plate clutch. my clutch only lasted 6 sets of tyre before it was shot. also a ****load of money cause a rebuild for a twin plate costs 1400 bucks.

thus the reson for my retirement no cash

pete

  • 2 weeks later...
  • 3 weeks later...

here are a few tips from the young nimble grass hoper

1> Drifting on standard suspension cause death.

2> dont every hesitate, dont come off the accel too fast if you think you're getting in a bad situation, flicking back the other way is usualy worse and ends up UBER bad

3> NEVER! EVER ! EVER! look at an object trying to avoid it!.. ANYONE will tell you this. anything you look at and concentrate on not hitting you WILL HIT!. if there is ONE pole in the middle of a feild at a race track, people will hit it =P dont look at the objects you're trying to avoid. look at where you want to go and make it so!

4> having ****ing orsome suspension can make even the shittest driver good =)

5>Have you car setup correctly for every weahter type.. if its wet, dont run 5º camber on front wheels! you'll understeer into poles, kurbs and other items.. also you'll loose ALL the respsone thru the steering wheel!.. adjustable camber tops are excellent at this, run 4-5º in dry =) and knock it back to 2-3 in wet.. this makes a big difference. For best drift effect, dial in AS MUCH CAMBER AS POSSIBLE AT REAR =)

enjoy...

Oh ye, and i'll say it again.

Drifting on standard suspension will cause death. DO NOT DO IT!

you may think your car is king, but it aint!.. get some coilovers or some decent shocks. rear/front swaybars/strut braces!

also automatics are dangerous to 'drift' in =P dont do it. get a manual.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...