Jump to content
SAU Community

Recommended Posts

my motor blew up the other day ive never been so cut in my life....now im just wondering what is the best option for me

i have a r32 gtr

shood i

find a standard rb26 motor and replace it

full rebuild

rb30 bottom end conversion

can anone help me and give me some idea of how much any of these actually cost and how reliable it would be and wat is the best option....im abit iffy on buying another old r32 motor as i didnt abuse this one and it still blew up

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/257109-so-my-motor-blew-up/
Share on other sites

:D Even looked after engines can go, remember it is over 15 years old too. The rest of my engine was immaculate when it let go, except for what happened to 1 piston... When it was pulled apart everything else was fine

my motor blew up the other day ive never been so cut in my life....now im just wondering what is the best option for me

i have a r32 gtr

shood i

find a standard rb26 motor and replace it ~$3000

full rebuild ~$7000/8000+

rb30 bottom end conversion same as above but a bit more at a guess...

can anone help me and give me some idea of how much any of these actually cost and how reliable it would be and wat is the best option....im abit iffy on buying another old r32 motor as i didnt abuse this one and it still blew up

thanks guys

find a standard rb26 motor and replace it ~$3000

full rebuild ~$7000/8000+

rb30 bottom end conversion same as above but a bit more at a guess...

standard rb26 3k + 1-2k remove and refit

rebuild 26 5k R&R + machine work/light headwork + parts 4k depending how far

30 bottom end conversion a 2k more then the rb26 in parts

Seriously guys, I don't know where the misconception on the cost of building a 30 came from but it is only a few hundred dollars difference in building a forged 20/25/26.. the difference being in buying a $100 RB30E, tapping new tensioner locations and getting a different timing belt.

Pistons, rods, headwork, cams (unless you want to go solids), oil pumps etc are all in the same ballpark for any RB engine.

Edited by bubba

i rebuilt my own rb25det and it cost something like $2000 and took less than 2 weeks. If all you have is a busted up piston and a worn out set of bearings you can do the same. Forgies are cheaper than they have ever been (and unless your the 700hp man it wont matter which ones you use) rods are usually fine bearings are less than 150 dollars then its just new gaskets and head and main bolts etc etc. Go give it a try its not rocket science all the info you need is on these forums and a rb26 with forged pistons will be happy to well over 450 hp! ppl go over board with their builds in my opinion

head - dont touch it just pull it off check it out and put it to one side and stick it back on when your finished

bottom end - pull it apart inspect it take it to engine machinist if your not sure. Get yourself some pistons, get machinist to match pistons to bores and put pistons on rings and pistons on your old rods. Then go home and stick it together bottom ends are pretty simple follow the instructions and you cant go wrong if something looks hammered get it checked out and replace it if its oil pump and water pump you should probably replace them anyway not too expensive put that tomei oil reducer in the block and there goes the mian reasons rb26's give up the ghost. Anyway this is my 2 cents and it depends how hands on you are perhaps read up about it first if it sounds do-able then give it a go.

Edited by mrsparkle
Seriously guys, I don't know where the misconception on the cost of building a 30 came from but it is only a few hundred dollars difference in building a forged 20/25/26.. the difference being in buying a $100 RB30E, tapping new tensioner locations and getting a different timing belt.

Pistons, rods, headwork, cams (unless you want to go solids), oil pumps etc are all in the same ballpark for any RB engine.

well awd adaptor plate is $900 + labour

+ retap block for rb26 arp headstuds another $500 + labour

+ timing belt/tensioner kit $300 + labour

+ crank collar $150 + labour

(going by pro engines pricing)

and any other nitty gritty things that you may need to fit a rb30 bottom end into a GTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...