Jump to content
SAU Community

Recommended Posts

hey guys

when i bought my car the previous owners gave me the xenon with it. its still got wires attached to it but i have no idea how to connect it up.

can anyone help me install them please???

payment can be a nice chilled slab of what ever poison you drink

ta

Ash

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/
Share on other sites

actually just did some reading. would be better to get aftermarket HID's as the ballast would have been removed from the headlight along with oter components that the car came with from fatory.

all good thread can be closed sory lol

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/#findComment-4430318
Share on other sites

  • 1 month later...

holly crap i forgot about this until today when my left headlight went out.

well this is what the previous owner gave me same things for each side

17032009157.jpg

the back of my headlight (passenger side)

17032009151.jpg

and the light itself

17032009149.jpg

17032009159.jpg

now i have figured out the wires coming out of the xenon with the metal mesh thing around it will joing onto the other end thats still sitting behind the headligs atm. what is the yellow plug with wires for???

i would like to get this done hopefully this weekend so any help from those who has done it will be great. be even better if i can bring the car to you and if you can do it for me??? :D

and yes i know i have chubby figures lol

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/#findComment-4483514
Share on other sites

fark it cold out :D

anyway took off hes headlight but hes xenons are different to urs, maybe because its a NA

but the yellow wire plug should go into the resistor and the 2 wires should go into the back of the middle globe, there will be a rubber gromet with 2 wires there most likely.

actually shouldnt be to hard to fix, solder the globe wires and then plug in the yellow wire plug and solder the other 2 wires

edit: ill be at my missus' saturday in lalor if you want me to try and fix it

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/#findComment-4483582
Share on other sites

fark it cold out :D

anyway took off hes headlight but hes xenons are different to urs, maybe because its a NA

but the yellow wire plug should go into the resistor and the 2 wires should go into the back of the middle globe, there will be a rubber gromet with 2 wires there most likely.

actually shouldnt be to hard to fix, solder the globe wires and then plug in the yellow wire plug and solder the other 2 wires

NA's didn't have xenons

unless its a gt-v maybe?

what do the parkers look like?

a circle, or a square?

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/#findComment-4483587
Share on other sites

fark it cold out :D

anyway took off hes headlight but hes xenons are different to urs, maybe because its a NA

but the yellow wire plug should go into the resistor and the 2 wires should go into the back of the middle globe, there will be a rubber gromet with 2 wires there most likely.

actually shouldnt be to hard to fix, solder the globe wires and then plug in the yellow wire plug and solder the other 2 wires

edit: ill be at my missus' saturday in lalor if you want me to try and fix it

ye i figured out where the other wires go apart from the yellow on.

no you say should be plugged at the back of the light.

this is the back of the light here

17032009161.jpg

i dont see no plugs where it will plug into

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/#findComment-4483593
Share on other sites

im thinking the yellow plug could be connectors for the headlight adjustment from inside the car.

prob be easy to pull the headlight out and see if anything else is tucked in there.

thanks anyways nick. it is pretty cold outside lol

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/#findComment-4483602
Share on other sites

r34 xenons dont have washers, so they are illegal

ok fair enough. i wondered why they were removed.

thanks for the info.

im not in any hurry removing mine though :D .

sorry for jumping in your thread like that ashneel.

Link to comment
https://www.sau.com.au/forums/topic/257398-help-with-xenon/#findComment-4483604
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...